Made to measure

Quarto plate

For extra thickness or larger dimensions, Outokumpu hot-rolled plates – quarto or heavy plates – are the ideal solution. Because Outokumpu oversees production from melt to market, superior quality and on-time delivery are assured. 

Find your nearest location

Grades, dimensions and services

METRIC DIMENSIONS
Surface finish Thickness (mm) Width (mm) Length (mm)
1D – Hot rolled, heat treated, pickled 5.0–130* 400–3,260 400–13,500

 

*) Thicknesses > 110 mm, 5 % reduced mechanical values. Thicknesses > 130 mm on request.

 

IMPERIAL DIMENSIONS
Surface finish Thickness (in) Width (in) Length (in)
1D – Hot rolled, heat treated, pickled 0.19685–5.11811 15.748–128.346 15.748–531.496

 

The maximum length for a given thickness and width combination might be restricted due to maximum piece weight restrictions.

The availability of specific dimensions and dimension combinations depends on the steel grade.

Storage tank calculator: Calculate material consumption with your specifications

Pressure vessel calculator: Use this tool to compare how steel grade selection affects the wall thickness in a pressure vessel’s cylindrical shell

Core 304/4301

Core 304/4301 is a classic 18% chromium, 8% nickel austenitic stainless steel. It’s an all-purpose product with good corrosion resistance and is suitable for a wide variety of applications that require good formability and weldability. Core 304/4301 can be delivered with a variety of surface finishes.

Please remove item from comparison before you can add another one

  • EN: 1.4301
  • ASTM type: 304
  • ASTM UNS: S30400
  • Microstructure: Austenitic
Typical applications
  • Household appliances and consumer goods
  • Kitchen equipment
  • Indoor and outdoor cladding, handrails and window frames
  • Food and beverage industry equipment
  • Storage tanks
  • Flanges and valves
Typical chemical composition, % by mass
  • C: 0.04
  • Cr: 18.1
  • Ni: 8.1
  • Mo: -
  • N: -
  • Others: -

Core 304L/4306

A higher nickel alternative to Core 304L/4307 with improved formability and deep drawability.

Please remove item from comparison before you can add another one

  • EN: 1.4306
  • ASTM type: 304L
  • ASTM UNS: S30403
  • Microstructure: Austenitic
Typical applications
  • Chemical and pharmaceutical plant equipment (mild to medium corrosive environments)
  • Flanges and valves
Typical chemical composition, % by mass
  • C: 0.02
  • Cr: 18.2
  • Ni: 10.1
  • Mo: -
  • N: -
  • Others: -

Core 304L/4307

Core 304L/4307 is a low-carbon alternative to Core 304/4301. The lower carbon content minimizes carbide precipitation as a result of heat input, for example during welding, giving improved resistance against intergranular corrosion. Core 304L/4307 is suitable for a wide variety of applications that require good formability and weldability, and can be delivered with a variety of surface finishes.

Please remove item from comparison before you can add another one

  • EN: 1.4307
  • ASTM type: 304L
  • ASTM UNS: S30403
  • Microstructure: Austenitic
Typical applications
  • Food and beverage industry equipment
  • Chemical and pharmaceutical industry equipment (mild to medium corrosive environments)
  • Heat exchangers
  • Storage tanks
  • Tank containers
  • Pipes and tubes
  • Flanges and valves
Typical chemical composition,% by mass
  • C: 0.02
  • Cr: 18.1
  • Ni: 8.1
  • Mo: -
  • N: -
  • Others: -

Core 304LN/4311

A low-carbon, higher nickel and nitrogen alloyed alternative to Core 304L/4307 with improved strength and low-temperature toughness. Suitable for applications that require high tensile strength.

Please remove item from comparison before you can add another one

  • EN: 1.4311
  • ASTM type: 304L
  • ASTM UNS: S30453
  • Microstructure: Austenitic
Typical applications
  • Railroad cars
  • Pressure vessels
  • Chemical plant equipment (mild to medium corrosive environments)
  • Flanges and valves
Typical chemical composition, % by mass
  • C: 0.02
  • Cr: 18.5
  • Ni: 9.2
  • Mo: -
  • N: 0.14
  • Others: -

Core 321/4541

A titanium-stabilized austenitic stainless steel with improved intergranular corrosion resistance for an extended temperature range.

Please remove item from comparison before you can add another one

  • EN: 1.4541
  • ASTM type: 321
  • ASTM UNS: S32100
  • Microstructure: Austenitic
Typical applications
  • Anneailing covers
  • Stack liners
  • Automotive exhaust systems
  • Welded pressure vessels
  • Flanges and valves
Typical chemical composotion, % by mass
  • C: 0.04
  • Cr: 17.3
  • Ni: 9.1
  • Mo: -
  • N: -
  • Others : Ti

Core 347/4550

Core 347/4550 is a niobium stabilized alternative to Core 321/4541 with improved intergranular corrosion resistance and good mechanical properties at high temperatures. Core 347/4550 is particularly useful in applications with intermittent heating in the range 400–900 °C/750–1650 °F.

Please remove item from comparison before you can add another one

  • EN: 1.4550
  • ASTM type: 347
  • ASTM UNS: S34700
  • Microstructure: Austenitic
Typical applications
  • High temperature gaskets
  • Rocket engine parts
  • Expansion joints
  • Aircraft collector rings
  • Exhaust manifolds
  • Chemical production equipment
  • Flanges and valves
Typical chemical composition, % by mass
  • C: 0.05
  • Cr: 17.5
  • Ni: 9.5
  • Mo: -
  • N: -
  • Others: Nb

Supra 316/4401 stainless steel

Supra 316/4401 is a widely used Molybdenum alloyed austenitic stainless steel. It’s an all-purpose product with very good corrosion resistance and is suitable for a wide variety of applications that require good formability and weldability. Supra 316/4401 can be delivered with a variety of surface finishes.

Please remove item from comparison before you can add another one

  • EN: 1.4401
  • ASTM type: 316
  • ASTM UNS: S31600
  • Microstructure: Austenitic
Typical applications
  • Heat exchangers
  • Flanges and valves
Chemical composition
  • C: 0.04
  • Cr: 17.2
  • Ni: 10.1
  • Mo: 2.1
  • N: -
  • Others : -

Supra 316L/4404 stainless steel

Supra 316L/4404 is a low-carbon alternative to Supra 316/4401. The lower carbon content minimizes carbide precipitation as a result of heat input, for example during welding, giving improved resistance against intergranular corrosion.Supra 316L/4404 is suitable for a wide variety of applications that require good formability and weldability, and can be delivered with a variety of surface finishes.

Please remove item from comparison before you can add another one

  • EN: 1.4404
  • ASTM type: 316L
  • ASTM UNS: S31603
  • Microstructure: Austenitic
Typical applications
  • Chemical industry
  • Petrochemical industry
  • Pulp and paper industry
  • Textile industry
  • Food and beverage industry
  • Pharmaceutical industry
  • Medical applications
  • Flanges and valves
Chemical composition
  • C: 0.02
  • Cr: 17.2
  • Ni: 10.1
  • Mo: 2.1
  • N: -
  • Others : -

Supra 316L/4435 stainless steel

Supra 316L/4435 is a alternative to 316L/4404 with higher molybdenum and nickel content for enhanced corrosion resistance and formability.

Please remove item from comparison before you can add another one

  • EN: 1.4435
  • ASTM type: 316L
  • ASTM UNS: S31603
  • Microstructure: Austenitic
Typical applications
  • Urea plants
  • Pulp and synthetic fiber plants
  • Flanges and valves
  • Cryogenic
  • Hydrogen
Chemical composition
  • C: 0.02
  • Cr: 17.3
  • Ni: 12.6
  • Mo : 2.6
  • N: -
  • Others : -

Supra 316/4436 stainless steel

Supra 316/4436 is a product with high resistance to non-oxidizing acids and chloride-containing media due to higher molybdenum content. It has good formability and weldability.

Please remove item from comparison before you can add another one

  • EN: 1.4436
  • ASTM type: 316
  • ASTM UNS: S31600
  • Microstructure: Austenitic
Typical applications
  • Pulp and paper industry equipment
  • Pharmaceutical industry equipment
  • Flanges and valves
Chemical composition
  • C: 0.04
  • Cr: 16.9
  • Ni: 10.7
  • Mo: 2.6
  • N: -
  • Others: -

Supra 316Ti/4571 stainless steel

Supra 316Ti/4571 is a titanium-stabilized alternative to Supra 316L/4404 – mainly used in Germany for elevated temperature applications. Due to its titanium-stabilization this product is weldable in all thickness ranges.

Please remove item from comparison before you can add another one

  • EN: 1.4571
  • ASTM type: 316Ti
  • ASTM UNS: S31635
  • Microstructure: Austenitic
Usage
  • Flue gas applications
  • Flanges and valves
Chemical composition
  • C: 0.04
  • Cr: 16.8
  • Ni: 10.9
  • Mo: 2.1
  • N: -
  • Others: Ti

Forta LDX 2101

A lean-alloyed duplex product with good resistance to localized and uniform corrosion, as well as stress corrosion cracking, making it a good substitute for coated carbon steel in e.g. structural components and storage tanks. Also offers high mechanical strength and good machinability.

Please remove item from comparison before you can add another one

  • EN: 1.4162
  • ASTM type: -
  • ASTM UNS: S32101
  • Microstructure: Duplex
Typical applications
  • Storage tanks
  • Household heaters
  • Structural components for floodgates and bridges, or rebar for concrete structures
  • Pulp and paper industry applications such as digesters and components for paper machines
  • Flanges and valves
Chemical composition, % by mass
  • C: 0.03
  • Cr: 21.5
  • Ni: 1.5
  • Mo: 0.3
  • N: 0.22
  • Others : 5 Mn Cu

Forta DX 2304

A duplex product with a leaner alloying composition than Forta DX 2205. It has good resistance to localized and uniform corrosion, as well as stress corrosion cracking, combined with high mechanical strength.

Please remove item from comparison before you can add another one

  • EN: 1.4362
  • ASTM type: -
  • ASTM UNS: S32304
  • Microstructure: Duplex
Typical applications
  • Pulp and paper industry applications
  • Blast walls on oil platforms
  • Flanges and valves
Chemical composition, % by mass
  • C: 0.02
  • Cr: 23.0
  • Ni: 4.8
  • Mo: 0.3
  • N: 0.10
  • Others: Cu

Forta LDX 2404

A low-nickel, high-nitrogen duplex product with higher mechanical strength than Forta DX 2205. Offers very good resistance to localized and uniform corrosion, as well as stress corrosion cracking.

Please remove item from comparison before you can add another one

  • EN: 1.4662
  • ASTM type: -
  • ASTM UNS: S82441
  • Microstructure: Duplex
Typical applications
  • Storage tanks
  • Structural components for flood and sluice gates
  • Mining industry applications such as dewatering equipment
  • Flanges and valves
Typical chemical composition, % by mass
  • C: 0.02
  • Cr: 24.0
  • Ni: 3.6
  • Mo: 1.6
  • N: 0.27
  • Others: 3Mn Cu

Forta DX 2205

The most popular duplex product on the market. Offers very good resistance to uniform and localized corrosion and stress corrosion cracking in combination with high mechanical strength.

Please remove item from comparison before you can add another one

  • EN: 1.4462
  • ASTM type: -
  • ASTM UNS: S32205
  • Microstructure: Duplex
Typical applications
  • Cargo tanks in chemical tankers
  • Pulp and paper industry applications such as digesters and process tanks
  • Oil and gas industry applications such as flanges, tubes, and pipes
  • Structural components in bridges
  • Flanges and valves
Chemical composition, % by mass
  • C: 0.02
  • Cr: 22.4
  • Ni: 5.7
  • Mo: 3.1
  • N: 0.17
  • Others: -

Forta SDX 2507

A super duplex product with higher corrosion resistance and mechanical strength than Forta DX 2205. Often used in extremely corrosive environments such as desalination, chemical, or offshore subsea applications.

Please remove item from comparison before you can add another one

  • EN: 1.4410
  • ASTM type: -
  • ASTM UNS: S32750
  • Microstructure: Duplex
Typical applications
  • Desalination plants
  • Industrial piping
  • Scrubbers
  • Tubular products for oil and gas applications
  • Deep-sea pipelines
  • Flanges and valves
Typical chemical composition, % by mass
  • C: 0.02
  • Cr: 25
  • Ni: 7.0
  • Mo: 4.0
  • N: 0.27
  • Others: -

Forta SDX 100

A super duplex product with higher corrosion resistance and mechanical strength than Forta DX 2205. Often used in extremely corrosive environments such as desalination, chemical, or offshore subsea applications.

Please remove item from comparison before you can add another one

  • EN: 1.4501
  • ASTM type: -
  • ASTM UNS: S32760
  • Microstructure: Duplex
Typical applications
  • Desalination plants
  • Industrial piping
  • Scrubbers
  • Tubular products for oil and gas applications
  • Deep-sea pipelines
  • Flanges and valves
Product forms
Chemical composition
  • C: 0.02
  • Cr: 25.4
  • Ni: 6.9
  • Mo: 3.8
  • N: 0.27
  • Others: W Cu

Ultra 4439 stainless steel

A molybdenum and nitrogen-alloyed austenitic stainless steel with significantly higher corrosion resistance than Supra 316L/4404. Also known as 317LMN.

Please remove item from comparison before you can add another one

  • EN: 1.4439
  • ASTM type: 317LMN
  • ASTM UNS: S31726
  • Microstructure: Austenitic
Typical applications
  • Chemical processing industry
  • Flue gas cleaning
  • Flanges and valves
Typical chemical composition, % by mass
  • C: 0.02
  • Cr: 17.3
  • Ni: 13.7
  • Mo: 4.1
  • N: 0.14
  • Others : -

Ultra 725LN stainless steel

Ultra 725LN is a type 310 material (high chrome and high nickel) that has been developed and optimized specifically for urea production, which demand extremely high corrosion resistance. It has similar general pitting resistance to Ultra 904L.

Please remove item from comparison before you can add another one

  • EN: 1.4466
  • ASTM type: -
  • ASTM UNS: S31050
  • Microstructure: Austenitic
Typical applications
  •  Urea applications
Product forms
Typical chemical composition, % by mass
  • C: 0.01
  • Cr: 25.0
  • Ni: 22.3
  • Mo: 2.1
  • N: 0.12
  • Others: -

Ultra 904L stainless steel

Ultra 904L is a high-nickel and molybdenum austenitic stainless steel with very high corrosion resistance. It was originally developed for handling sulfuric acid at ambient temperatures, and is now used in a broad range of chemical industry applications.

Please remove item from comparison before you can add another one

  • EN: 1.4539
  • ASTM type: 904L
  • ASTM UNS: NO8904
  • Microstructure: Austenitic
Typical applications
  • Chemical and petrochemical industry equipment such as pipes, heat exchangers, tanks, and reactor vessels
  • Sulfuric acid handling
  • Flanges and valves
Typical chemical composition, % by mass
  • C: 0.01
  • Cr: 19.8
  • Ni: 24.2
  • Mo: 4.3
  • N: -
  • Others: 1.4Cu

Ultra 254 SMO stainless steel

A 6 % molybdenum and nitrogen-alloyed austenitic stainless steel with extremely high resistance to both uniform and localized corrosion. This product was developed especially for oil and gas offshore platforms and the pulp and paper industry.

Please remove item from comparison before you can add another one

  • EN: 1.4547
  • ASTM type: -
  • ASTM UNS: S31254
  • Microstructure: Austenitic
Typical applications
  • Applications requiring resistance to chlorinated seawater
  • Flue gas cleaning
  • Maritime exhaust gas cleaning (EGC)
  • Bleaching equipment in the pulp and paper industry
  • Flanges and valves
Typical chemical composition, % by mass
  • C: 0.01
  • Cr: 20.0
  • Ni: 18.0
  • Mo: 6.1
  • N: 0.20
  • Others: Cu

Therma 153 MA stainless steel

Therma 153 MA is an austenitic stainless steel with excellent oxidation and creep resistance in cyclic conditions that is best employed in temperatures up to 1050°C/1920°F. This product has an excellent resistance to embrittlement.

Please remove item from comparison before you can add another one

  • EN: 1.4818
  • ASTM type: -
  • ASTM UNS: S30415
  • Microstructure: Austenitic
Typical applications
  • Recuperators
  • Conveyor belts
  • Expansion bellows
  • Power generation applications
  • Cyclone dip tubes
  • Bell furnaces
  • Muffle furnaces
  • Automotive components
  • Tube shields
  • Heat treatment trays
  • Dampers
  • Valves and flanges
Typical chemical composition, % by mass
  • C: 0.05
  • Cr: 18.5
  • Ni: 9.1
  • Mo: -
  • N: 0.15
  • Others : Si,Ce

Therma 4828 stainless steel

Therma 4828 is an austenitic heat resisting stainless steel with improved oxidation resistance in temperatures up to 1000°C/1830°F. There is a slight susceptibility to embrittlement during continuous operation atbetween 600–850°C/1110– 1560 °F.

Please remove item from comparison before you can add another one

  • EN: 1.4828
  • ASTM type: -
  • ASTM UNS: -
  • Microstructure: Austenitic
Typical applcations
  • Furnace equipment (especially supporting parts)
  • Annealing and hardening boxes
  • Air heaters
  • Exhaust systems
  • Automotive components such as turbochargers
  • Valves and flanges
Typical chemical composition, % by mass
  • C: 0.05
  • Cr: 19.3
  • Ni: 11.2
  • Mo: -
  • N: -
  • Others: Si

Therma 309S/4833 stainless steel

Therma 309S/4833 is an austenitic stainless steel with improved oxidation resistance in temperatures up to 1000°C/1830°F. There is a slight susceptibility to embrittlement during continuous operation at 600–900°C/1110–1652°F.

Please remove item from comparison before you can add another one

  • EN: 1.4833
  • ASTM type: 309S
  • ASTM UNS: S30908
  • Microstructure: Austenitic
Typical applications
  • Furnace equipment
  • Annealing boxes
  • Thermowells
  • Baffle plates
  • Pots for quenching salt
  • Valves and flanges
Typical chemical composition, % by mass
  • C: 0.06
  • Cr: 22.3
  • Ni: 12.3
  • Mo: -
  • N: -
  • Others: -

Therma 253 MA stainless steel

Therma 253 MA is an austenitic stainless steel with excellent oxidation and creep resistance in cyclic conditions that is best employed in temperatures up to 1150°C/2100°F. There is a slight susceptibility to embrittlement during continuous operation between 600–850°C/1110–1560°F.

Please remove item from comparison before you can add another one

  • EN: 1.4835
  • ASTM type: -
  • ASTM UNS: S30815
  • Microstructure: Austenitic
Typical applications
  • Oil industry equipment
  • Conveyor belts
  • Refractory anchors
  • Expansion bellows
  • Radiant tubes
  • Rotary kilns
  • Exhaust manifolds
  • Power generation applications
  • Cyclone dip tubes
  • Impact separators
  • Bell furnaces
  • Muffle furnaces
  • Automotive exhaust components
  • Tube shields
  • Heat treatment trays
  • Dampers
  • Recuperator tubes
  • Large-scale bakery ovens
  • Valves and flanges
Typical chemical composition, % by mass
  • C: 0.09
  • Cr: 21.0
  • Ni: 11.0
  • Mo: -
  • N: 0.17
  • Others: Si, Ce

Therma 314/4841 stainless steel

Therma 314/4841 is an austenitic heat resisting stainless steel with excellent oxidation resistance in temperatures up to 1150°C/2100°F. There is a high susceptibility to embrittlement during continuous operation at 600–900°C/1110–1652°F

Please remove item from comparison before you can add another one

  • EN: 1.4841
  • ASTM type: 314
  • ASTM UNS: S31400
  • Microstructure: Austenitic
Typical applications
  • Furnace equipment
  • Superheater suspensions
  • Enameling grates and hardening boxes
  • Valves and flanges
Typical chemical composition, % by mass
  • C: 0.06
  • Cr: 24.3
  • Ni: 19.2
  • Mo: -
  • N: -
  • Others: Si

Therma 321H/4878 stainless steel

Therma 321H/4878 is an austenitic heat resisting stainless steel with comparable wet corrosion resistance to Core 321/4541 that is best employed in temperatures up to 850 °C/1560 °F.

Please remove item from comparison before you can add another one

  • EN: 1.4878
  • ASTM type: 321H
  • ASTM UNS: -
  • Microstructure: Austenitic
Typical applications
  • Furnace equipment
  • Case hardening boxes
  • Valves and flanges
Typical chemical composition, % by mass
  • C: 0.05
  • Cr: 17.3
  • Ni: 9.1
  • Mo: -
  • N: -
  • Others: Ti 

Therma 310S/4845 stainless steel

Therma 310S/4845 is an austenitic product with very good oxidation resistance in general and good oxidation resistance in mildly cyclic conditions that is best employed in temperatures up to 1050°C/1920°F. There is a slight susceptibility to embrittlement during continuous operation between 600–900°C/1110–1652°F.

Please remove item from comparison before you can add another one

  • EN: 1.4845
  • ASTM type: 310S
  • ASTM UNS: S31008
  • Microstructure : Austenitic
Typical applications
  • Furnace equipment
  • Oil industry equipment
  • Heat treatment baskets
  • Heat exchangers
  • Steam boilers
  • Thermowells
  • Automotive components
  • Valves and flanges
Typical chemical composition, % by mass
  • C: 0.05
  • Cr: 25.5
  • Ni: 19.1
  • Mo: -
  • N: -
  • Others : -

Therma 304H/4948 stainless steel

Therma 304H/4948 is an austenitic Core 304/4301 variant with improved high-temperature creep strength that is best employed in temperatures up to 750°C/1380°F. It offers good formability and weldability.

Please remove item from comparison before you can add another one

  • EN: 1.4948
  • ASTM type: 304H
  • ASTM UNS: S30409
  • Microstructure: Austenitic
Typical applications
  • Tubes
  • Pressure vessels
  • Valves and flanges
Typical chemical composition, % by mass
  • C: 0.05
  • Cr: 18.1
  • Ni: 8.3
  • Mo: -
  • N: -
  • Others : -

Prodec 304L/4307 stainless steel

Prodec 304L/4307 is a version of Core 304L/4307 with improved machinability. It improves productivity with faster machining, longer tool life, better dimensional tolerances, superior machined surface quality, and improved yields compared to conventionally produced Core 304L/4307.

Please remove item from comparison before you can add another one

  • EN: 1.4307
  • ASTM type: 304L
  • ASTM UNS: S30403
  • Microstructure: Austenitic
Typical applications
  • Flanges  
  • Machined components
Product forms
Typical chemical composition, % by mass
  • C: 0.02
  • Cr: 18.1
  • Ni: 8.1
  • Mo: -
  • N: -
  • Others: -

Prodec 316/4404 stainless steel

Prodec 316L/4404 is a version of Supra 316L/4404 with improved machinability. It improves productivity with faster machining, longer tool life, better dimensional tolerances, superior machined surface quality, and improved yields compared to conventionally produced Supra 316L/4404.

Please remove item from comparison before you can add another one

  • EN: 1.4404
  • ASTM type: 316L
  • ASTM UNS: S31603
  • Microstructure: Austenitic
Typical applications
  • Flanges 
  • Machined components
Product forms
Typical chemical composition, % by mass
  • C: 0.02
  • Cr: 17.2
  • Ni: 10.1
  • Mo: 2.1
  • N: -
  • Others: -
Outokumpu is the leading supplier of stainless steel sheets and plates in Europe. Through our global network of plate service centres, we are equipped with state of the art machinery, and offer our customers a variety of processing solutions: bending, laser cutting, machining, plasma cutting, sawing, waterjet cutting and welding. In addition to our global network, we can offer a selection of additional services – such as grinding and leveling – through our extensive network of expert partners.

With extensive stock, and vast grade ranges, the Outokumpu plate service centers are the leading stainless profiling network that are located in Australia, China, Finland, France, Germany, Italy, the Netherlands, Sweden and the UK.

Our plate service centers are an important link in ensuring that the customer gets stainless steel formed and finished to precise requirements.
 
We offer our customers a total solution, from research and development, melting, rolling, tailor-made plates and cut components. Outokumpu handles the process from the mill right through to the final bespoke item delivered to the customer. This means logistical advantages, quality assurance, delivery reliability and cost savings for our customers, as well as total responsibility from the melt to the market.

Why Quarto Plate?

  • Made to precise customer specification.
  • Individually rolled quarto plates are customisable.
  • Quarto plate material also available to be delivered prefabricated.

Attributes

  • Thicknesses up to 130 mm and widths up to 3,200 mm.
  • Thicker than 130 mm available on request.
  • Large widths for streamlined construction.

The industrial strength solution

Outokumpu hot-rolled plates – quarto or heavy plates – are the ideal solution for extra thickness or larger dimensions. By overseeing production from melt to market, superior quality and on-time delivery are assured. Individually rolled quarto plates can be customized, and material can be delivered prefabricated (prepolished, with edge preparation and corrugation).

Individually rolled quarto plates are customizable and can be delivered prefabricated in diverse options such as pre-polished, with edge preparation and corrugation.

NORSOK-approved grades of Outokumpu quarto plate (duplex grades Forta DX 2205, super duplex Forta SDX 2507 and Forta SDX 100, as well as super austenitic Ultra 6XN and Ultra 254 SMO, also referred as 6Mo grades), are qualified for use in the oil and gas industry.

 

Expertise in production

More than 60 grades of stainless steel are produced in thicknesses of up to 110 mm, even thicker plates are available on request and widths of up to 3,200 mm at our state-of-the-art plate production unit in Degerfors, Sweden. There, deep industry expertise results in quarto plate with exceptional flatness and surface quality.

Outokumpu’s network of Plate Service Centers (PSCs) throughout Europe and Kunshan, China offers a comprehensive menu of services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing, and shearing.

Made for offshore.

Tackle your sour gas challenge with Ultra Alloy 825

Find out more

Downloads

Environmental product declaration - Cold rolled
Environmental product declaration - Hot rolled
BRE – Certified environmental product declaration (EPD) – Stainless steel reinforcing bar – Outokumpu Sheffield
LEED Green Building Rating Systems
LEED points summary
Outokumpu Degerfors improved capabilities datasheet
Outokumpu Degerfors quarto plate product and dimension program
Outokumpu quarto plate product and dimension program (US version with imperial units)
Safety information sheet for stainless steel in Europe
RoHS 2018
A selection of Stainless steel complying with BASTA and BVB