Managing the water mass

Minna Kalajoki

Challenge

The Lossendammen spillway structure in Central Sweden required two arched locks. The new locks should be easy to handle, yet robust enough to hold water mass for decades to come.

Solution

A high performance Outokumpu Forta duplex stainless was chosen for the two locks. The grade has high strength and resistance, yet good weldability enabling the desired arched shape.

Delivery

Steel grade: Outokumpu Forta LDX 2101
The giant Lossendammen check dam in Central Sweden is one of the country’s major water reservoirs. Built more than half century ago, it was time for an upgrade and safety-enhancing measures. As part of the project, the dam’s new spillway needed new locks, also known as spillway gates.

 

Future-proof product qualities

The locks are in constant contact with flowing water in harsh climate conditions some 600 kilometers south of the Arctic Circle. They have to withstand all possible water surges and reach a life span calculated in decades and centuries, rather than in years. An additional challenge was their desired shape, which was arched, as opposed to the traditional flat shape.

Outokumpu’s high performance Forta LDX 2101 duplex stainless was chosen for its ultimate product qualities for extreme conditions. The local partner was the Outokumpu Service Center in Degerfors, located 400 kilometers south of Lossendammen. The grade’s duplex microstructure contributes to high strength and high resistance to stress corrosion cracking and corrosion fatigue – important qualities in dam structures. Due to its elevated content of chromium and nitrogen, duplex stainless offers good resistance to localized and uniform corrosion, while good weldability contributed to achieving the desired arched shape of the locks.

 

26-tonnes lock

To facilitate the forging work, Outokumpu did all the cutting and bending of the steel plates, before delivering them to a local forging workshop with decades of experience in demanding steel work.

The particular stainless grade enables thinner structures and weight reduction, which was another decisive factor in this project: the two identical lock elements weigh 26 tonnes each. Reduced weight made their handling much easier, both in the workshop and during installation.

Read more about the Making of Lossendammen.

Recommended products and insights

How to build a bridge that saves a fortune

Our expert Andy Backhouse explains how the right grade of stainless steel can create a structure that resists corrosion and minimizes maintenance needs over a typical bridge lifetime.

Stainless steel for bridges

Bridge projects are in a class of their own – just like Outokumpu stainless steel. Marked by harsh environments, heavy lifetime usage and high aesthetic expectations, bridges demand special considerations upfront if they’re to go the distance.

Forta

The Forta range contains duplex and other high strength stainless steels that enable thinner structures and weight reduction (measured in Rp0.2 > 400 MPa. PRE 16 to 43).

Hot rolled stainless steel coil, strip and plate

Offering exceptional versatility, Outokumpu hot rolled coil, strip and plate are used in virtually all industries and markets. In addition to plates, Outokumpu produces quarto plate that is available in thicknesses up to 130 mm. 

Degerfors PSC, Sweden

Expertise built over more than a century sets Outokumpu’s Degerfors Plate Service Center apart from its competitors. Deep expertise and advanced innovation make Degerfors PSC the premier solution for complex projects.

Article

What if we could safely control the water flow?

Case pedestrian safety

New generation pedestrian safety

Case Jyväskylä power station

Expertise for extreme conditions

Case Story

The ultimate cliffhanger - The Gap

Article

Duplex in bridges and structures

Case Gårda Dämme

Floodgates to fight rising sea levels

Case Tammerkoski

Securing floodgates for two centuries

Technical article

Introducing the TWIP strengthening mechanism

Case solar energy plant

Sunlight in a tank