Moda

Acciaio inox per ambienti moderatamente corrosivi

La gamma Moda include nove prodotti in acciaio inox progettati per ambienti moderatamente corrosivi. I suoi acciai inossidabili ferritici sono senza nichel e magnetizzabili.

Acciai inossidabili per ambienti moderatamente corrosivi

I prodotti della gamma Moda sono progettati per applicazioni in ambienti moderatamente corrosivi, con un valore di resistenza al pitting equivalente (PRE) fino a 17. Questa gamma contiene il noto Moda 430/4016 oltre a diverse alternative e opzioni a basso contenuto di cromo. Contattaci per maggiori informazioni.

Trova la sede più vicina

Iscriviti per ricevere le ultime notizie sui prodotti

Gamma Moda per ambienti moderatamente corrosivi

La gamma Moda include gradi di acciaio inossidabile ferritico per ambienti moderatamente corrosivi con un valore PRE < 17. Il grado ferritico più utilizzato, Moda 430/4016 (EN 1.4016), è un classico acciaio inossidabile ferritico non stabilizzato al 16% di cromo. Le applicazioni tipiche sono attrezzature da cucina, elettrodomestici, lavelli e ascensori.

Moda 410L/4003 (EN 1.4003) è un acciaio inossidabile ferritico non stabilizzato al 12% di cromo progettato per applicazioni strutturali, quali telai degli autobus, con buone caratteristiche di saldatura e buone proprietà di impatto a temperature sotto zero.

La gamma Moda offre anche prodotti ferritici stabilizzati, ad esempio Moda 409/4512 (EN 1.4512), che è particolarmente adatto per alcune applicazioni automobilistiche. Inoltre, la gamma Moda di acciai inossidabili ferritici può vantare una lavorabilità paragonabile a quella degli acciai al carbonio di qualità per stampaggio profondo. Per quanto riguarda le caratteristiche di saldatura, i bassi livelli interstiziali e gli stabilizzanti aggiunti hanno apportato enormi miglioramenti agli acciai inossidabili ferritici. Inoltre, la distorsione e l'instabilità sono molto inferiori durante la saldatura rispetto a quelle degli acciai inossidabili austenitici o duplex a causa della minore dilatazione termica e della maggiore conduttività termica.

I gradi della gamma Moda possono essere utilizzati in un'ampio ventaglio di applicazioni, con il supporto di una vasta selezione di finiture superficiali fornito da stabilimenti e Centri servizi. 

Vedi di seguito l'elenco completo dei gradi Moda

Outokumpu Moda grades

Moda 430/4016 stainless steel

Moda 430/4016 is a classic 16 % chromium ferritic stainless steel used in mildly corrosive environments.

EN 1.4016

ASTM type 430

ASTM UNS S43000

Microstructure Ferritic

Typical applications

  • Kitchen equipment
  • Household appliances
  • Sinks
  • Flanges and valves

Datasheet

Download Moda range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Typical chemical composition, % by mass

C 0.05

Cr 16.2

Ni -

Mo -

N -

Others -

Per aggiungere un altro elemento, devi prima escludere questo dal confronto

Moda 430Ti/4520 stainless steel

Moda 430Ti/4520 is an alternative to Moda 430/4016 with better formability and weldability for stamping, drawability applications, and complex shapes.

EN 1.4520

ASTM type 430Ti

ASTM UNS -

Microstructure Ferritic

Typical applications

  • Counter tops
  • Flue induction connectors
  • Automotive applications

Datasheet

Download Moda range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Chemical composition

C 0.02

Cr 16.2

Ni -

Mo -

N -

Others Ti

Per aggiungere un altro elemento, devi prima escludere questo dal confronto

Moda 4589 stainless steel

Moda 4589 is a 14 % chromium product with a small amount of niobium for elevated strength, making it suitable for structural parts exposed to loads that demand higher yield points.

EN 1.4589

ASTM type -

ASTM UNS S42035

Microstructure Ferritic

Typical applications

  • Conveyor chains 
  • Railroad cars

Datasheet

Download Moda range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Chemical composition

C 0.05

Cr 14.0

Ni 1.7

Mo 0.3

N -

Others

Ti

 

Per aggiungere un altro elemento, devi prima escludere questo dal confronto

Moda 439/4510 stainless steel

A titanium-stabilized 17% chromium ferritic steel with improved corrosion resistance, formability, and weldability compared to Moda 430/4016.

EN 1.4510

ASTM type 439

ASTM UNS S43035

Microstructure Ferritic

Typical applications

  • Automotive exhaust systems
  • Sugar industry equipment
  • Household appliances

Datasheet

Download Moda range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Chemical composition

C 0.02

Cr 17.1

Ni -

Mo -

N -

Others Ti

Per aggiungere un altro elemento, devi prima escludere questo dal confronto

Moda 410L/4003 stainless steel

Moda 410L/4003 is a weldable ferritic stainless steel with elevated yield strength and resistance to abrasion. Its better corrosion resistance compared to carbon steels enables lower maintenance costs and longer service life.

EN 1.4003

ASTM type 410L

ASTM UNS S40977

Microstructure Ferritic

Typical applications

  • Railroad and road vehicles
  • Shipping containers
  • Industrial applications
  • Mining conveyors

Datasheet

Download Moda range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Chemical composition

C 0.02

Cr 11.5

Ni 0.5

Mo -

N -

Others -

Per aggiungere un altro elemento, devi prima escludere questo dal confronto

Moda 409/4512 stainless steel

Moda 409/4512 is a weldable ferritic stainless steel with good oxidation resistance in dry air. It is also available as low-carbon Moda 409L.

EN 1.4512

ASTM type 409

ASTM UNS -

Microstructure Ferritic

Typical applications

  • Automotive applications
  • Industrial exhaust systems

Datasheet

Download Moda range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Chemical composition

C 0.02

Cr 11.5

Ni 0,2

Mo -

N -

Others Ti

Per aggiungere un altro elemento, devi prima escludere questo dal confronto

Moda 410S-4000 stainless steel

Moda 410S/4000 is a 13% chromium general-purpose stainless steel that is used widely where corrosion is not severe. When supplied in the age hardened condition Moda 410S/4000 can be used where moderate corrosion and higher strength is required, while retaining its machinability.

EN 1.4000

ASTM type 410S

ASTM UNS S41008

Microstructure Ferritic

Typical applications

  • Bearings
  • Bushings
  • Dies
  • Fasteners
  • Pump shafts
  • Valves and valve components

Datasheet

Download Moda range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Chemical composition

C 0.03

Cr 12.5

Ni -

Mo -

N -

Others -

Per aggiungere un altro elemento, devi prima escludere questo dal confronto

Circle Green Moda 430/4016 stainless steel

Circle Green Moda 430/4016 is a classic 16 % chromium ferritic stainless steel used in mildly corrosive environments.

EN 1.4016

ASTM type 430

ASTM UNS S43000

Microstructure Ferritic

Typical applications

  • Kitchen equipment
  • Household appliances
  • Sinks
  • Flanges and valves

Datasheet

Download Moda range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Typical chemical composition, % by mass

C 0.05

Cr 16.2

Ni -

Mo -

N -

Others -

Per aggiungere un altro elemento, devi prima escludere questo dal confronto

Circle Green Moda 410L/4003 stainless steel

Circle Green Moda 410L/4003 is a weldable ferritic stainless steel with elevated yield strength and resistance to abrasion. Its better corrosion resistance compared to carbon steels enables lower maintenance costs and longer service life.

EN 1.4003

ASTM type 410L

ASTM UNS S40977

Microstructure Ferritic

Typical applications

  • Railroad and road vehicles
  • Shipping containers
  • Industrial applications
  • Mining conveyors

Datasheet

Download Moda range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Chemical composition

C 0.02

Cr 11.5

Ni 0.5

Mo -

N -

Others -

Per aggiungere un altro elemento, devi prima escludere questo dal confronto

Vai direttamente a Outokumpu Moda grades

Standards and approvals for Moda range

EN 10028-7 Flat products for pressure purposes – Stainless steels
EN 10088-1 Stainless steels – Part 1: List of stainless steels
EN 10088-2 Stainless steels – Corrosion resisting sheet/plate/strip for general and construction purposes
EN 10088-3 Stainless steels – Corrosion resisting semi-finished products/bars/rods/wire/sections for general and construction purposes
EN 10088-4 Stainless steel flat products, technical delivery conditions, steels for constructions
EN 10217-7 Welded steel tubes for pressure purposes – Stainless steel tubes
EN 10296-2 Welded circular steel tubes for mechanical and general engineering purposes - Stainless Steel tubes
ASTM A182 / ASME SA-182   Forged or rolled alloy-steel pipe flanges, forged fittings etc. for high temperature service
ASTM A240 / ASME SA-240 Heat-resisting Cr and Cr-Ni stainless steel plate/sheet/strip for pressure purposes
ASTM A276 Stainless and heat-resisting steel bars/shapes
ASTM A479 / ASME SA-479 Stainless steel bars for boilers and other pressure vessels
Eurocode 3 / EN 1993-1-4 Design of steel structures – Part 1-4: General rules – Supplementary rules for stainless steels
ISO 15510 Stainless steels – chemical composition

 

The most commonly used international product standards are given in the table. For a list of standards by product, see steelfinder.outokumpu.com

Outokumpu meets the most common certifications and approvals, including:

  • AD 2000 Merkblatt
  • Approval of Material Manufacturers
  • Factory Production Control Certificate
  • ISO 9001
  • ISO 14001
  • ISO 50001
  • ISO/TS 16949
  • NORSOK
  • OHSAS 18001
  • Pressure Equipment Directive (PED)

Casi

Article

New lean alternative to nickel-based alloys

Case Maastank

Duplex delivers for Port of Rotterdam storage tanks

Case Fiskars Group

Towards cookware that lasts generations: Fiskars Group makes long-lasting pans and...

Article

What Nynäshamn bridge tells us about the durability of stainless steel

Case Harvia

Full steam ahead towards circular economy

Article

Stainless steel stacks up for fuel cell bipolar plates

Case STILRIDE – Carbon footprint LCA

STILRIDE motors ahead with sustainable stainless steel

Article

Standards make it easier to choose duplex grades

Case Sodertalje bridge

Bridging the way to a more sustainable and economical future

Interessato al mondo dell'acciaio inossidabile? 

Resta sempre al corrente con la nostra newsletter mensile che ti fornisce le ultime notizie, articoli, webinar e approfondimenti.

Iscriviti