Why hot rolled coil, strip and plate
- Extensive width and thickness selection.
- Available in 1/1D surface finish. Outokumpu also offers semi-cold rolled RAP®2E (1/2E) surface finish.
- Available in austenitic, ferritic, duplex and martensitic grades.
Hot rolled coil, strip and plate
The perfect start
Hot rolled coils, strips and plates are available in a wide range of heat and corrosion resistant grades in all stainless steel types: austenitic, ferritic, duplex, and martensitic. The resulting material is highly workable and 100% recyclable.
Value to our customers
Contact us to get more information about our products
Benefits
Targeted properties for a tailored approach
Offering exceptional versatility, our hot rolled coil, strip and plate are used in virtually all industries and markets. In addition to plates, we produce quarto plate that is available in thicknesses up to 130 mm. Hot rolled coils, strips and plates are available in a wide range of heat- and corrosion-resistant grades in all stainless steel types: austenitic, ferritic, duplex and martensitic. The resulting material is highly workable and 100% recyclable.Expertise in production
We are one of the few stainless steel producers that can provide sheet and plate in widths up to two meters (72”). We offer standard widths (1,000, 1,250 and 1,500 mm) in a large range of thicknesses and grades, and the widest available thickness range (from 2.4 mm up to 12.7 mm). Tailored dimensions are available by request.
Dedicated to consistent quality, we produce hot rolled plate products with low residual stresses. An advanced leveling process provides superior flatness for various applications.
Our hot rolled products available in 1/1D surface finish. They are hot rolled, heat treated and pickled. We offer also semi-cold rolled 1/2E surface finish RAP®2E that is a relatively rough shot-blasted finish with cold band tolerances and less roughness than a 1/1D finish. RAP®2E is available in austenitic and ferritic grades.
Grades, dimensions and services
| METRIC DIMENSIONS | ||
|---|---|---|
| Surface finish | Thickness (mm) | Width (mm) |
| 1D – Hot rolled, heat treated, pickled | 2.4 – 12.7 | max. 2032 |
| IMPERIAL DIMENSIONS – PRODUCTS AVAILABLE FROM OUTOKUMPU AMERICAS | ||
|---|---|---|
| Surface finish | Thickness (in) | Width (in) |
| 1 – Hot rolled, heat treated, pickled | .1000 – .3750 | max. 72 |
The availability of surface finishes and dimensions depends on the steel grade. Check Outokumpu Steel Finder for more specific information.
This is Outokumpu standard dimensions, other dimensions are available on request. Please contact Outokumpu sales to discuss your needs.
Do you need a stainless steel that is produced in Americas? View Outokumpu product offering in Calvert, AL and in Mexinox
Storage tank calculator: Calculate material consumption with your specifications
Pressure vessel calculator: Use this tool to compare how steel grade selection affects the wall thickness in a pressure vessel’s cylindrical shell
Moda 430/4016 stainless steel
Moda 430/4016 is a classic 16 % chromium ferritic stainless steel used in mildly corrosive environments.
EN 1.4016
ASTM type 430
ASTM UNS S43000
Microstructure Ferritic
Typical applications
- Kitchen equipment
- Household appliances
- Sinks
- Flanges and valves
Product forms
Datasheet
Download Moda range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Typical chemical composition, % by mass
C 0.05
Cr 16.2
Ni -
Mo -
N -
Others -
Please remove item from comparison before you can add another one
Moda 439/4510 stainless steel
A titanium-stabilized 17% chromium ferritic steel with improved corrosion resistance, formability, and weldability compared to Moda 430/4016.
EN 1.4510
ASTM type 439
ASTM UNS S43035
Microstructure Ferritic
Typical applications
- Automotive exhaust systems
- Sugar industry equipment
- Household appliances
Product forms
Datasheet
Download Moda range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Chemical composition
C 0.02
Cr 17.1
Ni -
Mo -
N -
Others Ti
Please remove item from comparison before you can add another one
Moda 430Ti/4520 stainless steel
Moda 430Ti/4520 is an alternative to Moda 430/4016 with better formability and weldability for stamping, drawability applications, and complex shapes.
EN 1.4520
ASTM type 430Ti
ASTM UNS -
Microstructure Ferritic
Typical applications
- Counter tops
- Flue induction connectors
- Automotive applications
Product forms
Datasheet
Download Moda range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Chemical composition
C 0.02
Cr 16.2
Ni -
Mo -
N -
Others Ti
Please remove item from comparison before you can add another one
Moda 4589 stainless steel
Moda 4589 is a 14 % chromium product with a small amount of niobium for elevated strength, making it suitable for structural parts exposed to loads that demand higher yield points.
EN 1.4589
ASTM type -
ASTM UNS S42035
Microstructure Ferritic
Typical applications
- Conveyor chains
- Railroad cars
Product forms
Datasheet
Download Moda range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Chemical composition
C 0.05
Cr 14.0
Ni 1.7
Mo 0.3
N -
Others
Ti
Please remove item from comparison before you can add another one
Moda 410L/4003 stainless steel
Moda 410L/4003 is a weldable ferritic stainless steel with elevated yield strength and resistance to abrasion. Its better corrosion resistance compared to carbon steels enables lower maintenance costs and longer service life.
EN 1.4003
ASTM type 410L
ASTM UNS S40977
Microstructure Ferritic
Typical applications
- Railroad and road vehicles
- Shipping containers
- Industrial applications
- Mining conveyors
Product forms
Datasheet
Download Moda range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Chemical composition
C 0.02
Cr 11.5
Ni 0.5
Mo -
N -
Others -
Please remove item from comparison before you can add another one
Moda 409/4512 stainless steel
Moda 409/4512 is a weldable ferritic stainless steel with good oxidation resistance in dry air. It is also available as low-carbon Moda 409L.
EN 1.4512
ASTM type 409
ASTM UNS -
Microstructure Ferritic
Typical applications
- Automotive applications
- Industrial exhaust systems
Datasheet
Download Moda range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Chemical composition
C 0.02
Cr 11.5
Ni 0,2
Mo -
N -
Others Ti
Please remove item from comparison before you can add another one
Moda 410S-4000 stainless steel
Moda 410S/4000 is a 13% chromium general-purpose stainless steel that is used widely where corrosion is not severe. When supplied in the age hardened condition Moda 410S/4000 can be used where moderate corrosion and higher strength is required, while retaining its machinability.
EN 1.4000
ASTM type 410S
ASTM UNS S41008
Microstructure Ferritic
Typical applications
- Bearings
- Bushings
- Dies
- Fasteners
- Pump shafts
- Valves and valve components
Product forms
Datasheet
Download Moda range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Chemical composition
C 0.03
Cr 12.5
Ni -
Mo -
N -
Others -
Please remove item from comparison before you can add another one
Core 304/4301
Core 304/4301 is a classic 18% chromium, 8% nickel austenitic stainless steel. It’s an all-purpose product with good corrosion resistance and is suitable for a wide variety of applications that require good formability and weldability. Core 304/4301 can be delivered with a variety of surface finishes.
EN 1.4301
ASTM type 304
ASTM UNS S30400
Microstructure Austenitic
Typical applications
- Household appliances and consumer goods
- Kitchen equipment
- Indoor and outdoor cladding, handrails and window frames
- Food and beverage industry equipment
- Storage tanks
- Flanges and valves
Product forms
Datasheet
Download Core range datasheet
for more information on corrosion resistance, mechnanical properties, physical properties and fabrication.
Typical chemical composition, % by mass
C 0.04
Cr 18.1
Ni 8.1
Mo -
N -
Others -
Please remove item from comparison before you can add another one
Core 304L/4307
Core 304L/4307 is a low-carbon alternative to Core 304/4301. The lower carbon content minimizes carbide precipitation as a result of heat input, for example during welding, giving improved resistance against intergranular corrosion. Core 304L/4307 is suitable for a wide variety of applications that require good formability and weldability, and can be delivered with a variety of surface finishes.
EN 1.4307
ASTM type 304L
ASTM UNS S30403
Microstructure Austenitic
Typical applications
- Food and beverage industry equipment
- Chemical and pharmaceutical industry equipment (mild to medium corrosive environments)
- Heat exchangers
- Storage tanks
- Tank containers
- Pipes and tubes
- Flanges and valves
Product forms
Datasheet
Download Core range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Typical chemical composition,% by mass
C 0.02
Cr 18.1
Ni 8.1
Mo -
N -
Others -
Please remove item from comparison before you can add another one
Core 304LN/4311
A low-carbon, higher nickel and nitrogen alloyed alternative to Core 304L/4307 with improved strength and low-temperature toughness. Suitable for applications that require high tensile strength.
EN 1.4311
ASTM type 304L
ASTM UNS S30453
Microstructure Austenitic
Typical applications
- Railroad cars
- Pressure vessels
- Chemical plant equipment (mild to medium corrosive environments)
- Flanges and valves
Product forms
Datasheet
Download Core range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Typical chemical composition, % by mass
C 0.02
Cr 18.5
Ni 9.2
Mo -
N 0.14
Others -
Please remove item from comparison before you can add another one
Core 304L/4306
A higher nickel alternative to Core 304L/4307 with improved formability and deep drawability.
EN 1.4306
ASTM type 304L
ASTM UNS S30403
Microstructure Austenitic
Typical applications
- Chemical and pharmaceutical plant equipment (mild to medium corrosive environments)
- Flanges and valves
Product forms
Datasheet
Download Core range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Typical chemical composition, % by mass
C 0.02
Cr 18.2
Ni 10.1
Mo -
N -
Others -
Please remove item from comparison before you can add another one
Core 305/4303
A high-nickel alternative to Core 304/4301 with reduced strain hardening and excellent cold-forming properties. Ideal for parts that require high degree of deformation.
EN 1.4303
ASTM type 305
ASTM UNS S30500
Microstructure Austenitic
Typical applications
- Industrial parts with complex shapes
- Sinks and other deep-drawn products
- Complex stamping processes
- Re-rollers producing very thin-gauge coils
Product forms
Datasheet
Download Core range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Typical chemical composition, % by mass
C 0.04
Cr 17.7
Ni 12.5
Mo -
N -
Others -
Please remove item from comparison before you can add another one
Core 321/4541
A titanium-stabilized austenitic stainless steel with improved intergranular corrosion resistance for an extended temperature range.
EN 1.4541
ASTM type 321
ASTM UNS S32100
Microstructure Austenitic
Typical applications
- Anneailing covers
- Stack liners
- Automotive exhaust systems
- Welded pressure vessels
- Flanges and valves
Product forms
Datasheet
Download Core range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Typical chemical composotion, % by mass
C 0.04
Cr 17.3
Ni 9.1
Mo -
N -
Others Ti
Please remove item from comparison before you can add another one
Core 347/4550
Core 347/4550 is a niobium stabilized alternative to Core 321/4541 with improved intergranular corrosion resistance and good mechanical properties at high temperatures. Core 347/4550 is particularly useful in applications with intermittent heating in the range 400–900 °C/750–1650 °F.
EN 1.4550
ASTM type 347
ASTM UNS S34700
Microstructure Austenitic
Typical applications
- High temperature gaskets
- Rocket engine parts
- Expansion joints
- Aircraft collector rings
- Exhaust manifolds
- Chemical production equipment
- Flanges and valves
Product forms
Datasheet
Download Core range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Typical chemical composition, % by mass
C 0.05
Cr 17.5
Ni
9.5
Mo -
N -
Others Nb
Please remove item from comparison before you can add another one
Core 301LN/4318
A low-carbon, nitrogen alloyed alternative to Core 301/4310 with elevated strength, making it particularly suitable for lightweight construction.
EN 1.4318
ASTM type 301LN
ASTM UNS S30153
Microstructure Austenitic
Typical applications
• Automotive applications, especially vehicles chassis
• Railroad cars
Product forms
Datasheet
Download Core range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Typical chemical composition, % by mass
C 0.02
Cr 17.7
Ni 6.5
Mo -
N 0.14
Others -
Please remove item from comparison before you can add another one
Core 301/4310
A lower chromium and nickel alternative to Core 304/4301 with high work hardening capacity, this is a good choice for applications subjected to high mechanical loading
EN 1.4310
ASTM type 301
ASTM UNS S30100
Microstructure Austenitic
Typical applications
- Springs
- Press plates
- Conveyor chains
- Mixer blades
- Sinks
Product forms
Datasheet
Download Core range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Typical chemical composition, by mass %
C 0.10
Cr 17.0
Ni 7.0
Mo -
N -
Others -
Please remove item from comparison before you can add another one
Core 441/4509
A nickel-free 17% chromium ferritic stainless steel grade with good corrosion resistance and high-temperature strength was originally designed for exhaust systems. Core 441/4509 is available with single (niobium) or dual (niobium and titanium) stabilization. Due to good formability and weldability it is often a suitable replacement for Core 301/4310.
EN 1.4509
ASTM type -
ASTM UNS S43940
Microstructure Ferritic
Usage
- Indoor claddings
- Restaurant equipment and appliances
- Tubes
- Heat exchangers
Product forms
Datasheet
Download Core range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Typical chemical composition, % by mass
C 0.02
Cr 17.6
Ni -
Mo -
N
-
Others Nb, Ti
Please remove item from comparison before you can add another one
Core 439M
Very similar to Core 441/4509, but dual stabilized with titanium and niobium for a more even surface appearance and enhanced weldability. With 1% more chromium, it also has slightly better corrosion resistance.
EN -
ASTM type 439M
ASTM UNS S43932
Microstructure Ferritic
Typical applications
- Automotive exhaust systems
- Sugar industry equipment
- Household appliances
Product forms
Datasheet
Download Core range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Typical chemical composition, % by mass
C 0.02
Cr 17.6
Ni -
Mo -
N -
Others Ti,Nb
Please remove item from comparison before you can add another one
Core 4622
A nickel-free, high-chromium (21Cr) ferritic stainless steel with equal corrosion resistance to Core 304/4301. Core 4622 has excellent deep drawability and is almost ridging free, meaning it is easier to polish and has a lower overall production cost.
EN 1.4622
ASTM type -
ASTM UNS S44330
Microstructure Ferritic
Typical applications
- Household, catering and architectural applications (indoor and outdoor)
- Tubular products for automotive and process industries
- Building facades
- Tanks and process equipment
Datasheet
Download Core range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Typical chemical composition, % by mass
C 0.02
Cr 21.0
Ni -
Mo -
N -
Others Nb,Ti,Cu
Please remove item from comparison before you can add another one
Core 434/4113
A molybdenum-alloyed ferritic stainless steel that offers improved corrosion resistance. This grade is available from Outokumpu Americas.
EN 1.4113
ASTM type 434
ASTM UNS S43400
Microstructure Ferritic
Typical applications
- Automotive trim and fittings
Product forms
Datasheet
Download Core range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Typical chemical composition, % by mass
C 0.04
Cr 16.5
Ni -
Mo 1.0
N -
Others -
Please remove item from comparison before you can add another one
Supra 316/4401 stainless steel
Supra 316/4401 is a widely used Molybdenum alloyed austenitic stainless steel. It’s an all-purpose product with very good corrosion resistance and is suitable for a wide variety of applications that require good formability and weldability. Supra 316/4401 can be delivered with a variety of surface finishes.
EN 1.4401
ASTM type 316
ASTM UNS S31600
Microstructure Austenitic
Typical applications
- Heat exchangers
- Flanges and valves
Product forms
Datasheet
Outokumpu Supra range datasheet
for more information on corrosion resistance, mechnanical properties, physical properties and fabrication.
$name
Please remove item from comparison before you can add another one
Supra 316L/4404 stainless steel
Supra 316L/4404 is a low-carbon alternative to Supra 316/4401. The lower carbon content minimizes carbide precipitation as a result of heat input, for example during welding, giving improved resistance against intergranular corrosion.Supra 316L/4404 is suitable for a wide variety of applications that require good formability and weldability, and can be delivered with a variety of surface finishes.
EN 1.4404
ASTM type 316L
ASTM UNS S31603
Microstructure Austenitic
Typical applications
- Chemical industry
- Petrochemical industry
- Pulp and paper industry
- Textile industry
- Food and beverage industry
- Pharmaceutical industry
- Medical applications
- Flanges and valves
Product forms
Datasheet
Download Supra range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Chemical composition
C 0.02
Cr 17.2
Ni 10.1
Mo 2.1
N -
Others -
Please remove item from comparison before you can add another one
Supra 316plus stainless steel
Supra 316plus is the highest strength stainless steel in the Supra range. It is a cost-efficient, 21Cr lower-nickel/molybdenum alternative to traditional molybdenum austenitics like Supra 316L. This product has good formability, excellent weldability, and is usable in cryogenic applications.
EN 1.4420
ASTM type -
ASTM UNS S31655
Microstructure Austenitic
Typical applications
- Process and transport tanks
- Water treatment and pipes
- Heat exchangers
- Architectural applications
Datasheet
Download Supra range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Chemical composition
C 0.02
Cr 20.3
Ni 8.6
Mo 0.7
N 0.19
Others -
Please remove item from comparison before you can add another one
Supra 316/4436 stainless steel
Supra 316/4436 is a product with high resistance to non-oxidizing acids and chloride-containing media due to higher molybdenum content. It has good formability and weldability.
EN 1.4436
ASTM type 316
ASTM UNS S31600
Microstructure Austenitic
Typical applications
- Pulp and paper industry equipment
- Pharmaceutical industry equipment
- Flanges and valves
Product forms
Datasheet
Download Supra range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Chemical composition
C 0.04
Cr 16.9
Ni 10.7
Mo 2.6
N -
Others -
Please remove item from comparison before you can add another one
Supra 316L/4435 stainless steel
Supra 316L/4435 is a alternative to 316L/4404 with higher molybdenum and nickel content for enhanced corrosion resistance and formability.
EN 1.4435
ASTM type 316L
ASTM UNS S31603
Microstructure Austenitic
Typical applications
- Urea plants
- Pulp and synthetic fiber plants
- Flanges and valves
Product forms
Datasheet
Download Supra range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Chemical composition
C
0.02
Cr 17.3
Ni 12.6
Mo 2.6
N -
Others -
Please remove item from comparison before you can add another one
Supra 316Ti/4571 stainless steel
Supra 316Ti/4571 is a titanium-stabilized alternative to Supra 316L/4404 – mainly used in Germany for elevated temperature applications. Due to its titanium-stabilization this product is weldable in all thickness ranges.
EN 1.4571
ASTM type 316Ti
ASTM UNS S31635
Microstructure Austenitic
Usage
- Flue gas applications
- Flanges and valves
Product forms
Datasheet
Download Supra range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Chemical composition
C 0.04
Cr 16.8
Ni 10.9
Mo 2.1
N -
Others Ti
Please remove item from comparison before you can add another one
Forta LDX 2101
A lean-alloyed duplex product with good resistance to localized and uniform corrosion, as well as stress corrosion cracking, making it a good substitute for coated carbon steel in e.g. structural components and storage tanks. Also offers high mechanical strength and good machinability.
EN 1.4162
ASTM type -
ASTM UNS S32101
Microstructure Duplex
Typical applications
- Storage tanks
- Household heaters
- Structural components for floodgates and bridges, or rebar for concrete structures
- Pulp and paper industry applications such as digesters and components for paper machines
- Flanges and valves
Product forms
Datasheet
Download Forta duplex range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Chemical composition, % by mass
C 0.03
Cr 21.5
Ni 1.5
Mo 0.3
N 0.22
Others 5 Mn Cu
Please remove item from comparison before you can add another one
Forta DX 2304
A duplex product with a leaner alloying composition than Forta DX 2205. It has good resistance to localized and uniform corrosion, as well as stress corrosion cracking, combined with high mechanical strength.
EN 1.4362
ASTM type -
ASTM UNS S32304
Microstructure Duplex
Typical applications
- Pulp and paper industry applications
- Blast walls on oil platforms
- Flanges and valves
Product forms
Datasheet
Download Forta duplex range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Chemical composition, % by mass
C 0.02
Cr 23.0
Ni 4.8
Mo 0.3
N 0.10
Others Cu
Please remove item from comparison before you can add another one
Forta EDX 2304
An enhanced version of Forta DX 2304 with better corrosion resistance and higher mechanical strength.
EN 1.4362
ASTM type -
ASTM UNS S32304
Microstructure Duplex
Typical applications
- Offshore topside structural components
- Tank applications
- Flanges and valves
Product forms
Datasheet
Download Forta duplex range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Typical chemical composition, % by mass
C
0.02
Cr 23.8
Ni 4.3
Mo 0.5
N 0.18
Others Cu
Please remove item from comparison before you can add another one
Forta SDX 2507
A super duplex product with higher corrosion resistance and mechanical strength than Forta DX 2205. Often used in extremely corrosive environments such as desalination, chemical, or offshore subsea applications.
EN 1.4410
ASTM type -
ASTM UNS S32750
Microstructure Duplex
Typical applications
- Desalination plants
- Industrial piping
- Scrubbers
- Tubular products for oil and gas applications
- Deep-sea pipelines
- Flanges and valves
Product forms
Datasheet
Download Forta duplex range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Typical chemical composition, % by mass
C 0.02
Cr 25
Ni 7.0
Mo 4.0
N 0.27
Others -
Please remove item from comparison before you can add another one
Forta H400
Forta H400 has higher strength than standard 304/4301 and a lower nickel content, making it a cost-effective and lightweight austenitic product for the automotive industry. It has been used in automotive applications for over 10 years.
EN 1.4376
ASTM type -
ASTM UNS -
Microstructure Austenitic
Usage
- Cross members
- Strut domes
- Bumpers
Datasheet
Download Forta range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Typical chemical composition, % by mass
C 0.04
Cr 17.5
Ni 4.0
Mo -
N 0.20
Others 6.8Mn
Please remove item from comparison before you can add another one
Ultra 317L stainless steel
Ultra 317L is a molybdenum-alloyed austenitic stainless steel with higher corrosion resistance than Supra 316L/4404 – mainly used in the USA and Asia.
EN 1.4438
ASTM type
317L
ASTM UNS S31703
Microstructure Austenitic
Typical applications
- Chemical processing industry
Product forms
Data sheet
Dowload Ultra range datasheet
for more information on corrosion resistance, mechnanical properties, physical properties and fabrication
Typical chemical composition, % by mass
C 0.02
Cr 18.2
Ni 13.7
Mo 3.1
N -
Others -
Please remove item from comparison before you can add another one
Ultra 6XN stainless steel
Ultra 6XN is a 6 % molybdenum, high-nickel and nitrogen-alloyed austenitic product with extremely high resistance to both uniform and localized corrosion.
EN 1.4529
ASTM type -
ASTM UNS N08926/N08367
Microstructure Austenitic
Typical applications
- Applications requiring resistance to chlorinated seawater
- Flue gas cleaning
Product forms
Datasheet
Download Ultra range datasheet
for more information on corrosion resistance, mechnanical properties, physical properties and fabrication
Typical chemical composition, % by mass
C 0.01
Cr 20.5
Ni 24.8
Mo 6.5
N 0.20
Others Cu
Please remove item from comparison before you can add another one
Ultra 904L stainless steel
Ultra 904L is a high-nickel and molybdenum austenitic stainless steel with very high corrosion resistance. It was originally developed for handling sulfuric acid at ambient temperatures, and is now used in a broad range of chemical industry applications.
EN 1.4539
ASTM type 904L
ASTM UNS NO8904
Microstructure Austenitic
Typical applications
- Chemical and petrochemical industry equipment such as pipes, heat exchangers, tanks, and reactor vessels
- Sulfuric acid handling
- Flanges and valves
Product forms
Datasheet
Download Ultra range datasheet
for more information on corrosion resistance, mechnanical properties, physical properties and fabrication
Typical chemical composition, % by mass
C 0.01
Cr 19.8
Ni 24.2
Mo 4.3
N -
Others 1.4Cu
Please remove item from comparison before you can add another one
Ultra 254 SMO stainless steel
A 6 % molybdenum and nitrogen-alloyed austenitic stainless steel with extremely high resistance to both uniform and localized corrosion. This product was developed especially for oil and gas offshore platforms and the pulp and paper industry.
EN 1.4547
ASTM type -
ASTM UNS S31254
Microstructure Austenitic
Typical applications
- Applications requiring resistance to chlorinated seawater
- Flue gas cleaning
- Maritime exhaust gas cleaning (EGC)
- Bleaching equipment in the pulp and paper industry
- Flanges and valves
Product forms
Datasheet
Download Ultra range datasheet
for more information on corrosion resistance, mechnanical properties, physical properties and fabrication
Typical chemical composition, % by mass
C 0.01
Cr 20.0
Ni 18.0
Mo 6.1
N 0.20
Others Cu
Please remove item from comparison before you can add another one
Ultra 654 SMO stainless steel
Ultra 654 SMO is the most corrosion-resistant stainless steel in the world. A 7 % molybdenum, very high nitrogen alloyed austenitic product with high mechanical strength. A potentially lean alternative to traditional wet-corrosion resistant nickel-based alloys.
EN 1.4652
ASTM type -
ASTM UNS S32654
Microstructure Austenitic
Typical applications
- Pressurized and erosive systems handling chlorinated seawater at higher temperatures
- Plate heat exchangers
- Flue gas cleaning applications
Product forms
Datasheet
Typical chemical composition, % by mass
C 0.01
Cr 24.0
Ni 22.0
Mo 7.3
N 0.50
Others 3.5Mn Cu
Please remove item from comparison before you can add another one
Ultra 4565 stainless steel
A 4.5% molybdenum, very high nitrogen alloyed austenitic stainless steel with excellent corrosion resistance and high mechanical strength.
EN 1.4565
ASTM type -
ASTM UNS S34565
Microstructure Austenitic
Typical applications
- Flue gas desulfurization applications
Product forms
Data sheet
Download Ultra range datasheet
for more information on corrosion resistance, mechnanical properties, physical properties and fabrication
Typical chemical composition, % by mass
C 0.02
Cr 24.0
Ni 17.0
Mo 4.5
N 0.45
Others 5.5Mn
Please remove item from comparison before you can add another one
Dura 4024
A martensitic stainless steel with slightly better hardenability than Dura 410/4006 that is corrosion resistant in water and steam.
EN 1.4024
ASTM type -
ASTM UNS -
Microstructure Martensitic
Typical applications
- Mechanical engineering applications
- Surgical instruments
Datasheet
Typical chemical composition, % by mass
C 0.16
Cr 13.2
Ni -
Mo -
N -
Others -
Please remove item from comparison before you can add another one
Dura 420/4021
A very popular martensitic stainless steel that is corrosion resistant in water and steam.
EN 1.4021
ASTM type 420
ASTM UNS S42000
Microstructure Martensitic
Typical applications
- Cutting utensils
- Surgical instruments
- Press plates
- Brake discs
- Mechanical parts
- Flanges and valves
Product forms
Datasheet
Download Dura range datasheet
for more information on corrosion resistance, mechnanical properties, physical properties and fabrication
Typical chemical composition, % by mass
C 0.20
Cr 13.0
Ni -
Mo -
N -
Others -
Please remove item from comparison before you can add another one
Dura 420/4028
A martensitic stainless steel that is corrosion resistant in water and steam.
EN 1.4028
ASTM type 420
ASTM UNS S42000
Microstructure Martensitic
Typical applications
- Cutting utensils
- Surgical instruments
- Measuring tools
- Flanges and valves
- Wear-resistant mechanical parts
Product forms
Datasheet
Download Dura range datasheet
for more information on corrosion resistance, mechnanical properties, physical properties and fabrication
Typical chemical composition, % by mass
C 0.30
Cr 12.5
Ni -
Mo -
N -
Please remove item from comparison before you can add another one
Dura 420/4031
A martensitic stainless steel with medium-high hardness that is corrosion resistant in water and steam.
EN 1.4031
ASTM type 420
ASTM UNS S42000
Microstructure Martensitic
Typical applications
- Cutting utensils
- Surgical instruments
- Measuring tools
- Wear-resistant mechanical parts
Product forms
Datasheet
Download Dura range datasheet
for more information on corrosion resistance, mechnanical properties, physical properties and fabrication
Typical chemical composition, % by mass
C 0.38
Cr 13.5
Ni -
Mo -
N -
Others -
Please remove item from comparison before you can add another one
Dura 420/4034
A high-hardness martensitic stainless steel that is corrosion resistant in water and steam.
EN 1.4034
ASTM type 420
ASTM UNS S42000
Microstructure Martensitic
Typical applications
- Professional kitchen knives
- Surgical instruments
- Press plates
- Brake discs
Product forms
Datasheet
Download Dura range datasheet
for more information on corrosion resistance, mechnanical properties, physical properties and fabrication
Typical chemical composition, % by mass
C 0.45
Cr 13.7
Ni -
Mo -
N -
Others -
Please remove item from comparison before you can add another one
Dura 4419Mo
Similar to Dura 420/4028, but with improved corrosion resistance and high-temperature strength.
EN 1.4419
ASTM type -
ASTM UNS -
Microstructure Martensitic
Typical applications
- Mechanical engineering applications
Datasheet
Download Dura range datasheet
for more information on corrosion resistance, mechnanical properties, physical properties and fabrication
Typical chemical composition, % by mass
C 0.38
Cr 13.3
Ni -
Mo 0.9
N -
Others -
Please remove item from comparison before you can add another one
Dura 4122
Outokumpu’s most corrosion-resistant martensitic stainless steel. Good resistance in moderately corrosive, low-chloride environments and very good mechanical properties and wear resistance. Medium-high hardness.
EN 1.4122
ASTM type -
ASTM UNS -
Microstructure Martensitic
Typical applications
- Surgical instruments
- Food processing equipment
- Mechanical parts
- Machine and pump construction
Product forms
Datasheet
Download Dura range datasheet
for more information on corrosion resistance, mechnanical properties, physical properties and fabrication
Typical chemical composition, % by mass
C 0.41
Cr 16.1
Ni -
Mo 1.0
N -
Others -
Please remove item from comparison before you can add another one
Dura 4110
A high-hardness martensitic stainless steel with improved corrosion and wear resistance compared to Dura 420/4034.
EN 1.4410
ASTM type -
ASTM UNS -
Microstructure Martensitic
Typical applications
- Knife blades
- Scissors
- Surgical cutting tools
- Measuring tools
- Pump construction
- Valves
Datasheet
Download Dura range datasheet
for more information on corrosion resistance, mechnanical properties, physical properties and fabrication
Typical chemical composition, % by mass
C 0.50
Cr 14.8
Ni -
Mo 0.8
N -
Others -
Please remove item from comparison before you can add another one
Dura 4116
Similar to Dura 4110 but with elevated wear resistance.
EN 1.4116
ASTM type -
ASTM UNS -
Microstructure Martensitic
Typical applications
- Cutting instruments that undergo partial hardening
Datasheet
Download Dura range datasheet
for more information on corrosion resistance, mechnanical properties, physical properties and fabrication
Typical chemical composition, % by mass
C 0.50
Cr 14.4
Ni -
Mo 0.6
N -
Others -
Please remove item from comparison before you can add another one
Therma 253 MA stainless steel
Therma 253 MA is an austenitic stainless steel with excellent oxidation and creep resistance in cyclic conditions that is best employed in temperatures up to 1150°C/2100°F. There is a slight susceptibility to embrittlement during continuous operation between 600–850°C/1110–1560°F.
EN 1.4835
ASTM type -
ASTM UNS S30815
Microstructure Austenitic
Typical applications
- Oil industry equipment
- Conveyor belts
- Refractory anchors
- Expansion bellows
- Radiant tubes
- Rotary kilns
- Exhaust manifolds
- Power generation applications
- Cyclone dip tubes
- Impact separators
- Bell furnaces
- Muffle furnaces
- Automotive exhaust components
- Tube shields
- Heat treatment trays
- Dampers
- Recuperator tubes
- Large-scale bakery ovens
- Valves and flanges
Product forms
Datasheet
Download Therma range datasheet
for more information on corrosion resistance, mechnanical properties, physical properties and fabrication
Typical chemical composition, % by mass
C 0.09
Cr 21.0
Ni 11.0
Mo -
N 0.17
Others Si, Ce
Please remove item from comparison before you can add another one
Therma 310S/4845 stainless steel
Therma 310S/4845 is an austenitic product with very good oxidation resistance in general and good oxidation resistance in mildly cyclic conditions that is best employed in temperatures up to 1050°C/1920°F. There is a slight susceptibility to embrittlement during continuous operation between 600–900°C/1110–1652°F.
EN 1.4845
ASTM type 310S
ASTM UNS S31008
Microstructure Austenitic
Typical applications
- Furnace equipment
- Oil industry equipment
- Heat treatment baskets
- Heat exchangers
- Steam boilers
- Thermowells
- Automotive components
- Valves and flanges
Product forms
Datasheet
Typical chemical composition, % by mass
C 0.05
Cr 25.5
Ni 19.1
Mo -
N -
Others -
Please remove item from comparison before you can add another one
Therma 4713 stainless steel
Therma 4713 is a ferritic low-alloyed stainless steel best employed at 550–800 °C/1020– 1470 °F when you need higher mechanical loading compared to other ferritic grades. Offers good resistance against sulfur attack compared to nickel-alloyed grades.
EN 1.4713
ASTM type -
ASTM UNS -
Microstructure Ferritic
Typical applications
- Furnace equipment
- Air heaters
- Annealing boxes
- Conveyor belts
- Thermowells
Product forms
Datasheet
Download Therma range datasheet
for more information on corrosion resistance, mechnanical properties, physical properties and fabrication
Typical chemical composition, % by mass
C 0.06
Cr 6.5
Ni -
Mo -
N -
Others Al, Si
Please remove item from comparison before you can add another one
Therma 4724 stainless steel
Therma 4724 is a ferritic low-alloyed product with improved oxidation resistance in temperatures up to 850°C/1560°F.
EN 1.4724
ASTM type -
ASTM UNS -
Microstructure Ferritic
Typical applications
- Furnace equipment
- Thermal boiler components
- Grids
- Burner nozzles
- Conveyor belts
- Thermowells
Product forms
Datasheet
Download Therma range datasheet
for more information on corrosion resistance, mechnanical properties, physical properties and fabrication
Typical chemical composition, % by mass
C 0.07
Cr 12.5
Ni -
Mo -
N -
Others Al, Si
Please remove item from comparison before you can add another one
Therma 4742 stainless steel
Therma 4742 is a ferritic stainless steel with very good oxidation resistance in temperatures up to 1000 °C/1830 °F, but which begins to be subject to embrittlement at temperatures above 950°C/1740°F.
EN 1.4742
ASTM type -
ASTM UNS -
Microstructure Ferritic
Typical applications
- Grids
- Burner nozzles
- Conveyor belts
- Chains
- Machine parts
- Cement processing equipment
Product forms
Datasheet
Download Therma range datasheet
for more information on corrosion resistance, mechnanical properties, physical properties and fabrication
Typical chemical composition, % by mass
C 0.07
Cr 17.5
Ni -
Mo -
N -
Others Al, Si
Please remove item from comparison before you can add another one
Therma 153 MA stainless steel
Therma 153 MA is an austenitic stainless steel with excellent oxidation and creep resistance in cyclic conditions that is best employed in temperatures up to 1050°C/1920°F. This product has an excellent resistance to embrittlement.
EN 1.4818
ASTM type -
ASTM UNS S30415
Microstructure Austenitic
Typical applications
- Recuperators
- Conveyor belts
- Expansion bellows
- Power generation applications
- Cyclone dip tubes
- Bell furnaces
- Muffle furnaces
- Automotive components
- Tube shields
- Heat treatment trays
- Dampers
- Valves and flanges
Product forms
Datasheet
Download Therma range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Typical chemical composition, % by mass
C 0.05
Cr 18.5
Ni 9.1
Mo -
N 0.15
Others Si,Ce
Please remove item from comparison before you can add another one
Therma 4828 stainless steel
Therma 4828 is an austenitic heat resisting stainless steel with improved oxidation resistance in temperatures up to 1000°C/1830°F. There is a slight susceptibility to embrittlement during continuous operation atbetween 600–850°C/1110– 1560 °F.
EN 1.4828
ASTM type -
ASTM UNS -
Microstructure Austenitic
Typical applcations
- Furnace equipment (especially supporting parts)
- Annealing and hardening boxes
- Air heaters
- Exhaust systems
- Automotive components such as turbochargers
- Valves and flanges
Product forms
Datasheet
Download Therma range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Typical chemical composition, % by mass
C 0.05
Cr 19.3
Ni 11.2
Mo -
N -
Others Si
Please remove item from comparison before you can add another one
Therma 309S/4833 stainless steel
Therma 309S/4833 is an austenitic stainless steel with improved oxidation resistance in temperatures up to 1000°C/1830°F. There is a slight susceptibility to embrittlement during continuous operation at 600–900°C/1110–1652°F.
EN 1.4833
ASTM type 309S
ASTM UNS S30908
Microstructure Austenitic
Typical applications
- Furnace equipment
- Annealing boxes
- Thermowells
- Baffle plates
- Pots for quenching salt
- Valves and flanges
Product forms
Datasheet
Download Therma range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Typical chemical composition, % by mass
C 0.06
Cr 22.3
Ni 12.3
Mo -
N -
Others -
Please remove item from comparison before you can add another one
Therma 314/4841 stainless steel
Therma 314/4841 is an austenitic heat resisting stainless steel with excellent oxidation resistance in temperatures up to 1150°C/2100°F. There is a high susceptibility to embrittlement during continuous operation at 600–900°C/1110–1652°F
EN 1.4841
ASTM type 314
ASTM UNS S31400
Microstructure Austenitic
Typical applications
- Furnace equipment
- Superheater suspensions
- Enameling grates and hardening boxes
- Valves and flanges
Product forms
Datasheet
Download Therma range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Typical chemical composition, % by mass
C 0.06
Cr 24.3
Ni 19.2
Mo -
N -
Others Si
Please remove item from comparison before you can add another one
Therma 321H/4878 stainless steel
Therma 321H/4878 is an austenitic heat resisting stainless steel with comparable wet corrosion resistance to Core 321/4541 that is best employed in temperatures up to 850 °C/1560 °F.
EN 1.4878
ASTM type 321H
ASTM UNS -
Microstructure Austenitic
Typical applications
- Furnace equipment
- Case hardening boxes
- Valves and flanges
Product forms
Datasheet
Download Therma range datasheet
for more information on corrosion resistance, mechnanical properties, physical properties and fabrication
Typical chemical composition, % by mass
C 0.05
Cr 17.3
Ni 9.1
Mo -
N -
Others Ti
Please remove item from comparison before you can add another one
Therma 304H/4948 stainless steel
Therma 304H/4948 is an austenitic Core 304/4301 variant with improved high-temperature creep strength that is best employed in temperatures up to 750°C/1380°F. It offers good formability and weldability.
EN 1.4948
ASTM type 304H
ASTM UNS S30409
Microstructure Austenitic
Typical applications
- Tubes
- Pressure vessels
- Valves and flanges
Product forms
Datasheet
Download Therma range datasheet
for more information on corrosion resistance, mechnanical properties, physical properties and fabrication
Typical chemical composition, % by mass
C 0.05
Cr 18.1
Ni 8.3
Mo -
N -
Others -
Please remove item from comparison before you can add another one
Therma 347H stainless steel
Therma 347H is an austenitic heat resisting stainless steel with excellent long-term creep resistance at at 550–600°C/1020–1110°F and comparable wet corrosion resistance to Core 347/4550.
EN -
ASTM type 347H
ASTM UNS S34709
Microstructure Austenitic
Typical applications
- Oil refineries
- Fired heater tubes
- Boiler casings
- Pressure vessels
- Reactor vessels
- Welded tubes
- Fittings
- Stack liners
- Tanks for storing organic chemicals
- Furnace heating elements
- Tanks for thermal storage
- Valves and flanges
Product forms
Datasheet
Download Therma range datasheet
for more information on corrosion resistance, mechanical properties, physical properties and fabrication.
Typical chemical composition, % by mass
C 0.05
Cr 17.5
Ni 9.5
Mo -
N -
Others Nb
Please remove item from comparison before you can add another one
Outokumpu is the leading supplier of stainless steel sheets and plates in Europe. Through our global network of plate service centres, we are equipped with state of the art machinery, and offer our customers a variety of processing solutions: bending, laser cutting, machining, plasma cutting, sawing, waterjet cutting and welding. In addition to our global network, we can offer a selection of additional services – such as grinding and leveling – through our extensive network of expert partners.
With extensive stock, and vast grade ranges, the Outokumpu plate service centers are the leading stainless profiling network that are located in China, Finland, France, Germany, Italy, the Netherlands, Sweden and the UK.
Our plate service centers are an important link in ensuring that the customer gets stainless steel formed and finished to precise requirements.
We offer our customers a total solution, from research and development, melting, rolling, tailor-made plates and cut components. Outokumpu handles the process from the mill right through to the final bespoke item delivered to the customer. This means logistical advantages, quality assurance, delivery reliability and cost savings for our customers, as well as total responsibility from the melt to the market.
| SERVICES* | |||
|---|---|---|---|
| ABRASIVE WATER JET CUTTING | |||
| Maximum width | Maximum length | Maximum thickness | |
| 4,100 mm | 13,200 mm | 150 mm | |
| LASER EN ISO 9013 (Din 2310 (5)-IIL) | |||
| Maximum width | Maximum length | Maximum thickness | |
| 4 kW | 2.500 mm | 6.500 mm | 15 mm |
| 6 kW | 2.000 mm | 6.000 mm | 25 mm |
| SAWING | |||
| Maximum width | Maximum length | Maximum thickness | |
| 2,500 mm | 6,250 mm | 300 mm | |
| PLASMA EN ISO 9013 (Din 2310) | |||
| Maximum width | Maximum length | Maximum thickness | |
| Under water | 6,500 mm | 16,000 mm | 70 mm |
| Dry | to 6,500 mm | 18,000 mm | 150 mm |
| Possibility of welding edge preparation | |||
| LEVELER | |||
| Maximum width | Maximum length | Maximum thickness | |
| 1,450 mm | 2,000 mm | 35 mm | |
| Other dimensions on request. | |||
| MACHINING Turning/drilling/milling | |||
| Maximum width | |||
| 1,450 mm | |||
| Other dimensions on request. | |||
| SHEAR | |||
| Maximum length | |||
| 2 to 35 mm | 6,500 mm | ||
| BENDING 2.300 ton | |||
| Maximum length | |||
| 13,000 mm | |||
| PLASMA AND SUBMERGED ARC WELDING (SAW) | |||
| Maximum length | |||
| Profiles, pipes, submerged arc welding | 13,500 mm | ||
| IN COOPERATION WITH OUR ROLLING MILL | |||
| Welding edge preparation Milling 30/45/50 |
|||
| Grinding | |||
| * All data depending on dimensions and drawing | |||
Go directly to Grades, dimensions and services