Typical applications
- Kitchen equipment
- Household appliances
- Sinks
- Flanges and valves
Product forms
Datasheet
Typical chemical composition, % by mass
C 0.05
Cr 16.2
Ni -
Mo -
N -
Others -
Made to the tightest tolerances
Value to our customers
Contact us to get more information about our products
METRIC DIMENSIONS | ||
---|---|---|
Surface finish | Thickness (mm) | Width (mm) |
2R – Cold-rolled, bright-annealed | 0.05–1.50 | 3–649 |
2H – Work hardened | 0.05–1.50 | 3–630 |
IMPERIAL DIMENSIONS | ||
---|---|---|
Surface finish | Thickness (in) | Width (in) |
2R – Cold-rolled, bright-annealed | 0.002–0.06 | 0.118–25.551 |
2H – Work hardened | 0.002–0.06 | 0.118–24.803 |
The availability of specific surface finish and dimension combination depends on the steel grade.
Coils with inside diameter of 200, 300, 400 and 500 mm depending on strip width and thickness. Other coil inside diameters on request. Coil weight up to 10 kg/mm strip width. Can also be supplied on spools on request.
Width and thickness tolerances to EN 10258 (formerly DIN 59381). Closer tolerances can be agreed on.
Check Stainless Steel Finder to view different stainless steel grades, thickness and width ranges, and available finishes by product form based on EN and ASTM standards. You’ll also find information about stainless steel grades’ corrosion resistance, mechanical strength, elongation, and other properties.
A classic 16% chromium ferritic stainless steel used in mildly corrosive environments.
EN 1.4016
ASTM type 430
ASTM UNS S43000
Microstructure Ferritic
Typical applications
Product forms
Datasheet
Typical chemical composition, % by mass
C 0.05
Cr 16.2
Ni -
Mo -
N -
Others -
A titanium-stabilized 17% chromium ferritic steel with improved corrosion resistance, formability, and weldability compared to Moda 430/4016.
EN 1.4510
ASTM type 439
ASTM UNS S43035
Microstructure Ferritic
Typical applications
Product forms
Datasheet
Chemical composition
C 0.02
Cr 17.1
Ni -
Mo -
N -
Others Ti
A weldable ferritic stainless steel with good oxidation resistance in dry air. This product is also available as low-carbon Moda 409L.
EN 1.4512
ASTM type 409
ASTM UNS -
Microstructure Ferritic
Typical applications
Datasheet
Chemical composition
C 0.02
Cr 11.5
Ni 0,2
Mo -
N -
Others Ti
An alternative to Moda 430/4016 with better formability and weldability for stamping, drawability applications, and complex shapes
EN 1.4520
ASTM type 430Ti
ASTM UNS -
Microstructure Ferritic
Typical applications
Product forms
Datasheet
Chemical composition
C 0.02
Cr 16.2
Ni -
Mo -
N -
Others Ti
A molybdenum-alloyed ferritic stainless steel that offers improved corrosion resistance. This grade is available from Outokumpu Americas.
EN 1.4113
ASTM type 434
ASTM UNS S43400
Microstructure Ferritic
Typical applications
Product forms
Datasheet
Typical chemical composition, % by mass
C 0.04
Cr 16.5
Ni -
Mo 1.0
N -
Others -
Core 304/4301 is a classic 18% chromium, 8% nickel austenitic stainless steel. It’s an all-purpose product with good corrosion resistance and is suitable for a wide variety of applications that require good formability and weldability. Core 304/4301 can be delivered with a variety of surface finishes.
EN 1.4301
ASTM type 304
ASTM UNS S30400
Microstructure Austenitic
Typical applications
Product forms
Datasheet
Typical chemical composition, % by mass
C 0.04
Cr 18.1
Ni 8.1
Mo -
N -
Others -
A high-nickel alternative to Core 304/4301 with reduced strain hardening and excellent cold-forming properties. Ideal for parts that require high degree of deformation.
EN 1.4303
ASTM type 305
ASTM UNS S30500
Microstructure Austenitic
Typical applications
Product forms
Datasheet
Typical chemical composition, % by mass
C 0.04
Cr 17.7
Ni 12.5
Mo -
N -
Others -
A higher nickel alternative to Core 304L/4307 with improved formability and deep drawability.
EN 1.4306
ASTM type 304L
ASTM UNS S30403
Microstructure Austenitic
Typical applications
Product forms
Datasheet
Typical chemical composition, % by mass
C 0.02
Cr 18.2
Ni 10.1
Mo -
N -
Others -
Core 304L/4307 is a low-carbon alternative to Core 304/4301. The lower carbon content minimizes carbide precipitation as a result of heat input, for example during welding, giving improved resistance against intergranular corrosion. Core 304L/4307 is suitable for a wide variety of applications that require good formability and weldability, and can be delivered with a variety of surface finishes.
EN 1.4307
ASTM type 304L
ASTM UNS S30403
Microstructure Austenitic
Typical applications
Product forms
Datasheet
Typical chemical composition,% by mass
C 0.02
Cr 18.1
Ni 8.1
Mo -
N -
Others -
A lower chromium and nickel alternative to Core 304/4301 with high work hardening capacity, this is a good choice for applications subjected to high mechanical loading
EN 1.4310
ASTM type 301
ASTM UNS S30100
Microstructure Austenitic
Typical applications
Product forms
Datasheet
Typical chemical composition, by mass %
C 0.10
Cr 17.0
Ni 7.0
Mo -
N -
Others -
A low-carbon, nitrogen alloyed alternative to Core 301/4310 with elevated strength, making it particularly suitable for lightweight construction.
EN 1.4318
ASTM type 301LN
ASTM UNS S30153
Microstructure Austenitic
Typical applications
• Automotive applications, especially vehicles chassis
• Railroad cars
Product forms
Datasheet
Typical chemical composition, % by mass
C 0.02
Cr 17.7
Ni 6.5
Mo -
N 0.14
Others -
This low-nickel stainless steel has properties approaching Core 301/4310 but with a higher work hardening coefficient. Grade is available from Outokumpu Americas.
EN 1.4372
ASTM type 201
ASTM UNS S20100
Microstructure Austenitic
Typical applications
Product forms
Datasheet
Typical chemical composition, % by mass
C 0.05
Cr 16.1
Ni 3.6
Mo -
N 0.08
Others 7Mn
A nickel-free 17% chromium ferritic stainless steel grade with good corrosion resistance and high-temperature strength was originally designed for exhaust systems. Core 441/4509 is available with single (niobium) or dual (niobium and titanium) stabilization. Due to good formability and weldability it is often a suitable replacement for Core 301/4310.
EN
1.4509
ASTM type -
ASTM UNS S43940
Microstructure Ferritic
Usage
Product forms
Datasheet
Typical chemical composition, % by mass
C 0.02
Cr 17.6
Ni -
Mo -
N
-
Others Nb, Ti
A titanium-stabilized austenitic stainless steel with improved intergranular corrosion resistance for an extended temperature range.
EN 1.4541
ASTM type 321
ASTM UNS S32100
Microstructure Austenitic
Typical applications
Product forms
Datasheet
Typical chemical composotion, % by mass
C 0.04
Cr 17.3
Ni 9.1
Mo -
N -
Others Ti
Core 347/4550 is a niobium stabilized alternative to Core 321/4541 with improved intergranular corrosion resistance and good mechanical properties at high temperatures. Core 347/4550 is particularly useful in applications with intermittent heating in the range 400–900 °C/750–1650 °F.
EN 1.4550
ASTM type 347
ASTM UNS S34700
Microstructure Austenitic
Typical applications
Product forms
Datasheet
Typical chemical composition, % by mass
C 0.05
Cr 17.5
Ni
9.5
Mo -
N -
Others Nb
A nickel-free, high-chromium (21Cr) ferritic stainless steel with equal corrosion resistance to Core 304/4301. Core 4622 has excellent deep drawability and is almost ridging free, meaning it is easier to polish and has a lower overall production cost.
EN 1.4622
ASTM type -
ASTM UNS S44330
Microstructure Ferritic
Typical applications
Datasheet
Typical chemical composition, % by mass
C 0.02
Cr 21.0
Ni -
Mo -
N -
Others Nb,Ti,Cu
Supra 316/4401 is a widely used Molybdenum alloyed austenitic stainless steel. It’s an all-purpose product with very good corrosion resistance and is suitable for a wide variety of applications that require good formability and weldability. Supra 316/4401 can be delivered with a variety of surface finishes.
EN 1.4401
ASTM type 316
ASTM UNS S31600
Microstructure Austenitic
Typical applications
Product forms
Datasheet
Chemical composition
C 0.04
Cr 17.2
Ni 10.1
Mo 2.1
N -
Others -
Supra 316L/4404 is a low-carbon alternative to Supra 316/4401. The lower carbon content minimizes carbide precipitation as a result of heat input, for example during welding, giving improved resistance against intergranular corrosion.Supra 316L/4404 is suitable for a wide variety of applications that require good formability and weldability, and can be delivered with a variety of surface finishes.
EN 1.4404
ASTM type 316L
ASTM UNS S31603
Microstructure Austenitic
Typical applications
Product forms
Datasheet
Chemical composition
C 0.02
Cr 17.2
Ni 10.1
Mo 2.1
N -
Others -
The highest strength stainless steel in the Supra range. Supra 316plus is a cost-efficient, 21Cr lower-nickel/molybdenum alternative to traditional molybdenum austenitics like Supra 316L. This product has good formability, excellent weldability, and is usable in cryogenic applications.
EN 1.4420
ASTM type -
ASTM UNS S31655
Microstructure Austenitic
Typical applications
Datasheet
Chemical composition
C 0.02
Cr 20.3
Ni 8.6
Mo 0.7
N 0.19
Others -
A Supra 316L/4435 alternative with higher chromium and nickel content for enhanced corrosion resistance and formability.
EN 1.4435
ASTM type 316L
ASTM UNS S31603
Microstructure Austenitic
Typical applications
Product forms
Datasheet
Chemical composition
C
0.02
Cr 17.3
Ni 12.6
Mo 2.6
N -
Others -
A product with high resistance to non-oxidizing acids and chloride-containing media due to higher molybdenum content. Supra 316/4436 has good formability and weldability.
EN 1.4436
ASTM type 316
ASTM UNS S31600
Microstructure Austenitic
Typical applications
Product forms
Datasheet
Chemical composition
C 0.04
Cr 16.9
Ni 10.7
Mo 2.6
N -
Others -
A nickel-free molybdenum-alloyed ferritic stainless steel with very good corrosion resistance, good cold formability and high strength. Supra 444/4521 allows for thinner walls in tanks and is not prone to stress corrosion cracking.
EN 1.4521
ASTM type 444
ASTM UNS S444000
Microstructure Ferritic
Typical applications
Product forms
Datasheet
Chemical composition
C 0.02
Cr 18.0
Ni -
Mo 20
N -
Others Nb,Ti
A titanium-stabilized alternative to Supra 316L/4404 – mainly used in Germany for elevated temperature applications. Due to its titanium-stabilization this product is weldable in all thickness ranges.
EN 1.4571
ASTM type 316Ti
ASTM UNS S31635
Microstructure Austenitic
Usage
Product forms
Datasheet
Chemical composition
C 0.04
Cr 16.8
Ni 10.9
Mo 2.1
N -
Others Ti
Forta H400 has higher strength than standard 304/4301 and a lower nickel content, making it a cost-effective and lightweight austenitic product for the automotive industry. It has been used in automotive applications for over 10 years.
EN
1.4376
ASTM type -
ASTM UNS -
Microstructure Austenitic
Usage
Datasheet
Typical chemical composition, % by mass
C 0.04
Cr 17.5
Ni 4.0
Mo -
N 0.20
Others 6.8Mn
The most popular duplex product on the market. Offers very good resistance to uniform and localized corrosion and stress corrosion cracking in combination with high mechanical strength.
EN 1.4462
ASTM type -
ASTM UNS S32205
Microstructure Duplex
Typical applications
Product forms
Datasheet
Chemical composition, % by mass
C 0.02
Cr 22.4
Ni 5.7
Mo 3.1
N 0.17
Others -
A molybdenum-alloyed austenitic stainless steel with higher corrosion resistance than Supra 316L/4404 – mainly used in the USA and Asia.
EN 1.4438
ASTM type
317L
ASTM UNS S31703
Microstructure Austenitic
Typical applications
Product forms
Data sheet
Typical chemical composition, % by mass
C 0.02
Cr 18.2
Ni 13.7
Mo 3.1
N -
Others -
A molybdenum and nitrogen-alloyed austenitic stainless steel with significantly higher corrosion resistance than Supra 316L/4404. Also known as 317LMN.
EN 1.4439
ASTM type 317LMN
ASTM UNS S31726
Microstructure Austenitic
Typical applications
Product forms
Datasheet
Typical chemical composition, % by mass
C 0.02
Cr 17.3
Ni 13.7
Mo 4.1
N 0.14
Others -
A 6% molybdenum, high-nickel and nitrogen-alloyed austenitic product with extremely high resistance to both uniform and localized corrosion.
EN 1.4529
ASTM type -
ASTM UNS N08926/N08367
Microstructure Austenitic
Typical applications
Product forms
Datasheet
Typical chemical composition, % by mass
C 0.01
Cr 20.5
Ni 24.8
Mo 6.5
N 0.20
Others Cu
A high-nickel and molybdenum austenitic stainless steel with very high corrosion resistance. Ultra 904L was originally developed for handling sulfuric acid at ambient temperatures, and is now used in a broad range of chemical industry applications.
EN 1.4539
ASTM type 904L
ASTM UNS NO8904
Microstructure Austenitic
Typical applications
Product forms
Datasheet
Typical chemical composition, % by mass
C 0.01
Cr 19.8
Ni 24.2
Mo 4.3
N -
Others 1.4Cu
A 6 % molybdenum and nitrogen-alloyed austenitic stainless steel with extremely high resistance to both uniform and localized corrosion. This product was developed especially for oil and gas offshore platforms and the pulp and paper industry.
EN 1.4547
ASTM type -
ASTM UNS S31254
Microstructure Austenitic
Typical applications
Product forms
Datasheet
Typical chemical composition, % by mass
C 0.01
Cr 20.0
Ni 18.0
Mo 6.1
N 0.20
Others Cu
A 4.5% molybdenum, very high nitrogen alloyed austenitic stainless steel with excellent corrosion resistance and high mechanical strength.
EN 1.4565
ASTM type -
ASTM UNS S34565
Microstructure Austenitic
Typical applications
Product forms
Data sheet
Typical chemical composition, % by mass
C 0.02
Cr 24.0
Ni 17.0
Mo 4.5
N 0.45
Others 5.5Mn
A very popular martensitic stainless steel that is corrosion resistant in water and steam.
EN 1.4021
ASTM type 420
ASTM UNS S42000
Microstructure Martensitic
Typical applications
Product forms
Datasheet
Typical chemical composition, % by mass
C 0.20
Cr 13.0
Ni -
Mo -
N -
Others -
A precipitation hardening stainless steel with high strength and hardness, good corrosion resistance, and satisfactory formability (depending on heat treatment/condition).
EN 1.4568
ASTM 631
UNS S17700
Microstructure Precipitation hardening
Typical applications
Product forms
Datasheet
Typical chemical composition, % by mass
C 0.08
Cr 17.0
Ni 7.0
Mo -
N -
Others Al
An austenitic stainless steel with excellent oxidation and creep resistance in cyclic conditions that is best employed in temperatures up to 1050°C/1920°F. This product has an excellent resistance to embrittlement.
EN 1.4818
ASTM type -
ASTM UNS S30415
Microstructure Austenitic
Typical applications
Product forms
Datasheet
Typical chemical composition, % by mass
C 0.05
Cr 18.5
Ni 9.1
Mo -
N 0.15
Others Si,Ce
An austenitic heat resisting stainless steel with improved oxidation resistance in temperatures up to 1000°C/1830°F. There is a slight susceptibility to embrittlement during continuous operation atbetween 600–850°C/1110– 1560°F.
EN 1.4828
ASTM type -
ASTM UNS -
Microstructure Austenitic
Typical applcations
Product forms
Datasheet
Typical chemical composition, % by mass
C 0.05
Cr 19.3
Ni 11.2
Mo -
N -
Others Si
An austenitic stainless steel with excellent oxidation and creep resistance in cyclic conditions that is best employed in temperatures up to 1150°C/2100°F. There is a slight susceptibility to embrittlement during continuous operation between 600–850°C/1110–1560°F.
EN 1.4835
ASTM type -
ASTM UNS S30815
Microstructure Austenitic
Typical applications
Product forms
Datasheet
Typical chemical composition, % by mass
C 0.09
Cr 21.0
Ni 11.0
Mo -
N 0.17
Others Si, Ce
An austenitic heat resisting stainless steel with excellent oxidation resistance in temperatures up to 1150°C/2100°F. There is a high susceptibility to embrittlement during continuous operation at 600–900°C/1110–1652°F
EN 1.4841
ASTM type 314
ASTM UNS S31400
Microstructure Austenitic
Typical applications
Product forms
Datasheet
Typical chemical composition, % by mass
C 0.06
Cr 24.3
Ni 19.2
Mo -
N -
Others Si
An austenitic product with very good oxidation resistance in general and good oxidation resistance in mildly cyclic conditions that is best employed in temperatures up to 1050°C/1920°F. There is a slight susceptibility to embrittlement during continuous operation between 600–900°C/1110–1652°F
EN 1.4845
ASTM type 310S
ASTM UNS S31800
Microstructure Austenitic
Typical applications
Product forms
Datasheet
Typical chemical composition, % by mass
C 0.05
Cr 25.5
Ni 19.1
Mo -
N -
Others -
An austenitic heat resisting stainless steel with comparable wet corrosion resistance to Core 321/4541 that is best employed in temperatures up to 850°C/1560°F
EN 1.4878
ASTM type 321H
ASTM UNS -
Microstructure Austenitic
Typical applications
Product forms
Datasheet
Typical chemical composition, % by mass
C 0.05
Cr 17.3
Ni 9.1
Mo -
N -
Others Ti
Go directly to Available grades and dimensions