- Coil polishing
- Sheet polishing
Business Area Europe, Coil And Plate Service Center
Using advanced technology, Melbourne produces cut-to-length materials to customer specifications, as well as in standard industry sizes, in thicknesses ranging from 0.50 mm to 3.00 mm and up to 1,500 mm wide. Exceptional precision allows cutting to very fine tolerances. For sinks and hot water heaters, Melbourne produces blanks that are both very square and very flat.
Polishing both sheet and coil forms, the service center offers superior quality in industry-leading finish options. Melbourne specializes in uniform, consistent finishes, detail that is vitally important to manufacturers in the elevator industry and in food and catering. Coatings, including standard, laser and PVC, offer an extra layer of protection while finished products are in transit.
At Melbourne, we take great pride in the partnerships we build with our customers. Whether it’s cut-to-length materials, polishing or coatings, every function can be tailored to specific customer requirements. Coils are polished to meet strict client weight and length requirements, and edge tracking prevents telescoping. And because the service center works exclusively with stainless steel, there is no threat of the contamination that exists in facilities where other products are run.
Established in 1997, the Melbourne Service Center works primarily with long products in the Outokumpu Classic family’s Moda, Core and Supra ranges. All Outokumpu products are available direct from the mill via sales offices in Perth and Sydney. For our customers, that means full access to Outokumpu’s portfolio of high quality, consistent and uniform material sourced from European and U.S. mills.
All Outokumpu products are available direct from the mill via sales offices in Melbourne, Perth and Sydney. Expedited Fast Track service from European mills translates into exceptionally short lead times. Stock on hand in Melbourne (mainly in grades 430, 4622, 304/L, 316/L) makes next-day deliveries possible in some cases.
|CUT-TO-LENGTH LINE CAPABILITIES|
|Thickness range||Length||Length tolerance||Mandrel capacity||Tight diagonal tolerance|
|0.50 mm to 3.00 mm thick and up to 1,500 mm wide||from 200 mm sheets to 6,250 mm plates||1.00 mm for every 3,000 mm cut||up to 10,500 kg||within 1.00 mm every 3,000 mm|
|Thickness range||Decoil mother coils||Plastic coating (PE)|
|0.50 mm to 3.00 mm thick||up to 1,500 mm wide||from 10,500 kg down to 750 kg||Standard PE, Standard laser PE, Fibre Laser PE, Low tack PE, Deep drawing PE & PVC. All major brands (Polifilm, Novacel and Nitto)|
|Sheet length range||Plastic coating (PE)|
|between 880 mm and 4,000 mm long||up to 1,500 mm wide||Standard PE, Standard laser PE, Fibre Laser PE, Low tack PE, Deep drawing PE & PVC. All major brands (Polifilm, Novacel and Nitto)|
|(larger sheets up to 6,250 mm are delivered via the Coil polishing / Cut-to-length route)|
|Coil polisher||Plastic coating (PE)|
|0.55 mm-3 mm thickness||to 1,500 mm wide||Standard PE, Standard laser PE, Fibre Laser PE, Low tack PE, Deep drawing PE & PVC. All major brands (Polifilm, Novacel and Nitto)|