Case Valmet flue-gas cleaning units

Courtney Tenz

Challenge

Ships operating in the EU after 2015 needed to meet a directive limiting their sulphur concentration to below 0.1 percent. Ships therefore needed to install flue-gas desulphurization units to remove sulphur dioxide.

Solution

Finnish company Valmet used several grades of stainless steel for two 20-tonnes desulphurization units. The grades provide superior corrosion resistance for the harsh environment.

Delivery

Steel grade: Outokumpu Forta SDX 2507, Forta DX 2205, Ultra 254 SMOand Supra 316L/4404
Product form: coil, sheet and plate

Stainless solution for greener ships

Emissions reduction is a collective agenda today. With countries around the world implementing regulations to prevent the release of greenhouse gases, companies like Valmet have stepped up with advanced air pollution control tools.

After an EU directive went into effect in 2015 that required ships operating in the EU to limit their sulphur concentration to below 0.1%, Valmet designed two flue-gas desulphurization units to be used in the Baltic and Northern Seas. Each unit weighs some 20 tonnes and is approximately 12 meters tall.

 

Pollutant prevention

With these units, the harmful organic and inorganic substances that are created during combustion are no longer discharged into the atmosphere. Instead, with a flue-gas desulphurization unit, carbon dioxide, sulphur dioxide, dust and soot can be concentrated and deposited safely underground.

Several studies have been conducted to determine which material is best for use in such a harsh environment. Sulphuric acid condensation has been long recognized as a cause of corrosion in flue-gas desulphurization units. Sulphur, seawater and heat placed together require highly corrosion resistant materials.

 

A harsh environment

“The environment in the flue-gas desulphurization unit is harsh and varies depending on where ships are sailing. Sulphur, seawater and heat put together require highly corrosion resistant materials. Due to the presence of such demanding environments, we decided to use duplex stainless steel grades,” says Juha Laukka at Valmet.

For the two units, Outokumpu provided 40 tonnes in total, consisting of four high-alloyed stainless steel grades – Outokumpu Forta SDX 2507 super duplex stainless steel, Forta DX 2205 duplex stainless steel, Ultra 254 SMO austenitic stainless steel and Supra 316L/4404 austenitic stainless steel.

“We get good benefits of Outokumpu’s duplex grades in flue-gas cleaning, where material is under a lot of pressure. Duplex is an excellent material in this use,” says Laukka.

Recommended products and insight

Richburg SC, USA

At Outokumpu Stainless Bar, production flexibility, high quality products and exceptional service are standard operating procedure.

Automotive and transportation

In transportation, today’s solutions must be dynamic enough to carry us to the future. Safe, strong, economical, durable and sustainable: Stainless steel delivers a new dimension of unmatched performance.

Automotive

Today’s automotive industry is driven by a global emphasis on sustainability, safety and efficiency. Materials that can handle high temperatures and corrosive environments are essential.

Core

The Core range contains austenitic and ferritic stainless steel products for mild to medium corrosive environments. The classic 18/8 stainless steel is part of Outokumpu Core range.

Dura

The Dura range contains Outokumpu's high hardness and precipitation hardening (PH) stainless steel products.

Forta

The Forta range contains duplex and other high strength stainless steels that enable thinner structures and weight reduction (measured in Rp0.2 > 400 MPa. PRE 16 to 43).

Stainless steel bar

Outstanding machinability for greater efficiency​​​​​​​​.